CAN/SERCOS/Ethercat - digital solutions?
22 Jul 2017 12:32 #96280
by sirop
There is no free lunch: without special hardware your latency will deteriorate.
As www.sercos.org/certification shows, Sercos expects you to certify any new developed Sercos device.
Keep an eye on TSN : en.wikipedia.org/wiki/Time-Sensitive_Networking
www.nxp.com/products/microcontrollers-an...l-iot:LS1021A-TSN-RD
Replied by sirop on topic Re:CAN/SERCOS/Ethercat - digital solutions?
All these field bus is have deterministic capacity. CC-link ie & powerlink ie not require special hardware at all, sercos3 and ethercat require special chip on slave side.
I need to know better if sercos3 with this new dress completely opensources has by chance abandoned the special slave side chip ....
regards
giorgio
There is no free lunch: without special hardware your latency will deteriorate.
As www.sercos.org/certification shows, Sercos expects you to certify any new developed Sercos device.
Keep an eye on TSN : en.wikipedia.org/wiki/Time-Sensitive_Networking
www.nxp.com/products/microcontrollers-an...l-iot:LS1021A-TSN-RD
The following user(s) said Thank You: bkt
Please Log in or Create an account to join the conversation.
26 Jul 2017 15:27 #96481
by andypugh
Replied by andypugh on topic Re:CAN/SERCOS/Ethercat - digital solutions?
Maybe the Mesa Smart-Serial interface will grow into a standard? It is already used by more than just Mesa hardware,
STMBL
uses it too.
Please Log in or Create an account to join the conversation.
Time to create page: 0.152 seconds