Controller for stepper 4H5618C0408 (SH5618C2908)

Start
Prev
1
Next
End

roach81
Offline
New Member

21 Dec 2011 10:49 - 21 Dec 2011 11:02 #15922 by roach81

Controller for stepper 4H5618C0408 (SH5618C2908) was created by roach81

There are several engines 4H5618C0408

new labeling SH5618C2908

manual: en.nanotec.com/downloads/pdf/1409/SH5618C2908.pdf

Please help me choose a controller for EMC2
Thanks in advance!

Last edit: 21 Dec 2011 11:02 by roach81.

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

21 Dec 2011 12:49 #15927 by BigJohnT

Replied by BigJohnT on topic Re:Controller for stepper 4H5618C0408 (SH5618C2908)

My personal favorite drive is the Gecko G203v. You have all the info to make the calculations as shown on this page:

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Stepper_Formulas

also more info on this page:

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Ste...or_Speed_Limitations

Another favorite is the G540 and the single version of it the G251 for lower voltage systems. Both are just scaled down G203v's so they have all the protection like the G203v's do.

John

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: PCW, jmelson

Time to create page: 0.219 seconds