SSI absolute encoders and analog servos

More
9 years 9 months ago #85969 by tommylight
Replied by tommylight on topic SSI absolute encoders and analog servos
Got to this point by trial and error.
See attached
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #86033 by terkaa
Replied by terkaa on topic SSI absolute encoders and analog servos
I started with core_sim4.hal and modified it to working configuration But it is NOT simulation. It is just a file name...


Tero

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #86035 by tommylight
Replied by tommylight on topic SSI absolute encoders and analog servos

terkaa wrote: I started with core_sim4.hal and modified it to working configuration But it is NOT simulation. It is just a file name...


Tero

Thank you Tero, i made a new config with axis as UI and added the stuff for SSI and feedback, got to show something, but still messy, will continue later.
Thank you very much.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.147 seconds
Powered by Kunena Forum