Does anyone have a Mesa 7i76e for sale?

More
15 Aug 2022 20:37 #249820 by TG_Imagineer
Looking for 1 or more Mesa 7i76e boards. If you have 1 or more you would like to sell please let me know.
Thanks

Please Log in or Create an account to join the conversation.

More
15 Aug 2022 21:23 #249825 by Clive S

Looking for 1 or more Mesa 7i76e boards. If you have 1 or more you would like to sell please let me know.
Thanks


It might help if you say where you are based in the world

Please Log in or Create an account to join the conversation.

More
15 Aug 2022 22:38 #249830 by TG_Imagineer
Your right, a location would help...
Ohio USA

Please Log in or Create an account to join the conversation.

More
26 Aug 2022 21:18 #250544 by fons
i'm also looking for such a board
i'm from belgium

Please Log in or Create an account to join the conversation.

More
26 Aug 2022 22:33 #250548 by tommylight
There are some Mesa 7i96S on eusurplus in Portugal, it is similar to 7i76E, but has less I/O and not sure about the analog spindle control.
It has expansion ports, IDC26 and RS422/485, so more I/O is as easy as adding a 7i84 through a UTP/LAN cable.
eusurplus.com/index.php?route=product/pr...62_71&product_id=159
Same goes for the other side of the pond, mesaus has 5 of them in stock right now:
mesaus.com/product/7i96s/

Please Log in or Create an account to join the conversation.

More
04 Oct 2022 22:01 #253477 by mcbeam85
I'm also looking for such a board. I'm from germany.
Does anyone know when new 7i76e are on the market again?

Please Log in or Create an account to join the conversation.

More
13 Nov 2022 18:04 - 13 Nov 2022 18:06 #256588 by fons
at eusurplus.com you can buy one for the moment
Last edit: 13 Nov 2022 18:06 by fons.

Please Log in or Create an account to join the conversation.

More
13 Nov 2022 21:58 #256613 by JT
If you add a 7i84 to the 7i96S you add 32 inputs and 16 outputs to the 7i96S
The 7I96S is a Ethernet connected motion control interface designed for interfacing up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96S also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interface is provided for spindle synchronized motion and an isolated analog spindle output allows spindle speed control . A RS-422/RS485 serial port and a parallel port are provided for I/O expansion .

I should have some 7i84 stock in a few weeks I think.

JT

Please Log in or Create an account to join the conversation.

More
14 Nov 2022 12:56 #256683 by fons
i'm from europe
and i like to buy at least one 7i84 but like you say not in stoch also not in stock at eusurplus in spanje
inform me when you have one and what are the delivery conditions

Please Log in or Create an account to join the conversation.

More
14 Nov 2022 19:09 #256708 by tommylight
eusurplus is in Portugal, as far as i know.

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.275 seconds
Powered by Kunena Forum