7i97+7i85 bit file

More
18 Feb 2023 23:02 #264778 by saquzi
7i97+7i85 bit file was created by saquzi
Hi, would it be possible to get a bit file for this combination? I actually only needed more sserial for all of the 8i20 amps that i have, and thought that the 7i85 would work and that I would propably run out of encoder inputs before the sserial so therefore I did not pick the 7i74..But now I came to understand that there does not seem to be that kind of bit file available. If the right bit file can't be done, (I'd appreciate quick response to can it be done or not so i know if i have to order or wait for the right file)  I just have to order the 7i74 too   

Please Log in or Create an account to join the conversation.

More
18 Feb 2023 23:28 #264780 by PCW
Replied by PCW on topic 7i97+7i85 bit file
 

File Attachment:

File Name: 7i97_7i85d.zip
File Size:119 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
19 Feb 2023 15:40 #264810 by saquzi
Replied by saquzi on topic 7i97+7i85 bit file
Thank you :) I loaded that bitfile, but I can't find the additional sserial or encoder inputs in command line or in halshow... I have power to the 7i85.. idc26 to db25 cable checked with multimeter and all seems to be ok.

Please Log in or Create an account to join the conversation.

More
19 Feb 2023 15:53 #264814 by PCW
Replied by PCW on topic 7i97+7i85 bit file
did you power cycle the 7I97?

Please Log in or Create an account to join the conversation.

More
19 Feb 2023 19:10 #264823 by saquzi
Replied by saquzi on topic 7i97+7i85 bit file
Yes i have power cycled it couple of times after that.

Please Log in or Create an account to join the conversation.

More
19 Feb 2023 22:08 #264832 by PCW
Replied by PCW on topic 7i97+7i85 bit file
I'll check on a 7I97 Monday.

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 02:30 #264845 by Tesremos
Replied by Tesremos on topic 7i97+7i85 bit file
was there any update on this?
im using the same config and bit file, but cannoth seem to get the sserial cards talking.

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 16:06 #264877 by PCW
Replied by PCW on topic 7i97+7i85 bit file
what does

mesaflash --device 7i97 --addr [card_IP_address] --readhmid

report?

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 23:19 #264915 by saquzi
Replied by saquzi on topic 7i97+7i85 bit file
saquzi@debian:~$ mesaflash --device 7i97 --addr 10.10.10.10 --readhmid
Configuration Name: HOSTMOT2

General configuration information:

  BoardName : MESA7I97
  FPGA Size: 9 KGates
  FPGA Pins: 144
  Number of IO Ports: 3
  Width of one I/O port: 17
  Clock Low frequency: 100.0000 MHz
  Clock High frequency: 200.0000 MHz
  IDROM Type: 3
  Instance Stride 0: 4
  Instance Stride 1: 64
  Register Stride 0: 256
  Register Stride 1: 256

Modules in configuration:

  Module: DPLL
  There are 1 of DPLL in configuration
  Version: 0
  Registers: 7
  BaseAddress: 7000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: WatchDog
  There are 1 of WatchDog in configuration
  Version: 0
  Registers: 3
  BaseAddress: 0C00
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: IOPort
  There are 3 of IOPort in configuration
  Version: 0
  Registers: 5
  BaseAddress: 1000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: MuxedQCount
  There are 6 of MuxedQCount in configuration
  Version: 4
  Registers: 5
  BaseAddress: 3600
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: MuxedQCountSel
  There are 1 of MuxedQCountSel in configuration
  Version: 0
  Registers: 0
  BaseAddress: 0000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: SSerial
  There are 1 of SSerial in configuration
  Version: 0
  Registers: 6
  BaseAddress: 5B00
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 64 bytes

  Module: PWM
  There are 6 of PWM in configuration
  Version: 0
  Registers: 5
  BaseAddress: 4100
  ClockFrequency: 200.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: SSR
  There are 1 of SSR in configuration
  Version: 0
  Registers: 2
  BaseAddress: 7D00
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: InMux
  There are 1 of InMux in configuration
  Version: 0
  Registers: 5
  BaseAddress: 8000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: LED
  There are 1 of LED in configuration
  Version: 0
  Registers: 1
  BaseAddress: 0200
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

Configuration pin-out:

IO Connections for TB1/TB2/TB3
Pin#                  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir

TB3-4                   0   IOPort       PWM              0        PWM             (Out)
TB3-8                   1   IOPort       PWM              1        PWM             (Out)
TB3-12                  2   IOPort       PWM              2        PWM             (Out)
TB3-16                  3   IOPort       PWM              3        PWM             (Out)
TB3-20                  4   IOPort       PWM              4        PWM             (Out)
TB3-20                  5   IOPort       PWM              4        /Enable         (Out)
TB3-24                  6   IOPort       PWM              5        PWM             (Out)
TB3-24                  7   IOPort       PWM              5        /Enable         (Out)
TB3-4,8,12,16           8   IOPort       PWM              0        /Enable         (Out)
TB1-1,2,9,10            9   IOPort       MuxedQCount      0        MuxQ-A          (In)
TB1-4,5,12,13          10   IOPort       MuxedQCount      0        MuxQ-B          (In)
TB1-7,8,15,16          11   IOPort       MuxedQCount      0        MuxQ-IDX        (In)
TB1-17,18,TB2 1,2      12   IOPort       MuxedQCount      1        MuxQ-A          (In)
TB1-20,21,TB2-4,5      13   IOPort       MuxedQCount      1        MuxQ-B          (In)
TB1-23,24,TB2-7,8      14   IOPort       MuxedQCount      1        MuxQ-IDX        (In)
TB2-9,10,17,18         15   IOPort       MuxedQCount      2        MuxQ-A          (In)
TB2-12,13,20,21        16   IOPort       MuxedQCount      2        MuxQ-B          (In)

IO Connections for TB4/TB5
Pin#                  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir

TB2-15,16,23,24        17   IOPort       MuxedQCount      2        MuxQ-IDX        (In)
Internal-EncMux        18   IOPort       MuxedQCountSel   0        MuxSel0         (Out)
TB5-13,14              19   IOPort       SSR              0        Out-00          (Out)
TB5-15,16              20   IOPort       SSR              0        Out-01          (Out)
TB5-17,18              21   IOPort       SSR              0        Out-02          (Out)
TB5-19,20              22   IOPort       SSR              0        Out-03          (Out)
TB5-21,22              23   IOPort       SSR              0        Out-04          (Out)
TB5-23,24              24   IOPort       SSR              0        Out-05          (Out)
Internal               25   IOPort       SSR              0        AC Ref          (Out)
Internal               26   IOPort       InMux            0        Addr0           (Out)
Internal               27   IOPort       InMux            0        Addr1           (Out)
Internal               28   IOPort       InMux            0        Addr2           (Out)
Internal               29   IOPort       InMux            0        Addr3           (Out)
Internal               30   IOPort       InMux            0        Data0           (In)
TB4-15,16              31   IOPort       SSerial          0        RXData0         (In)
TB4-17,18              32   IOPort       SSerial          0        TXData0         (Out)
Internal-TXEn          33   IOPort       SSerial          0        TXEn0           (Out)

IO Connections for P1
Pin#                  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir

P1-01/DB25-01          34   IOPort       None           
P1-02/DB25-14          35   IOPort       None           
P1-03/DB25-02          36   IOPort       None           
P1-04/DB25-15          37   IOPort       None           
P1-05/DB25-03          38   IOPort       None           
P1-06/DB25-16          39   IOPort       None           
P1-07/DB25-04          40   IOPort       None           
P1-08/DB25-17          41   IOPort       None           
P1-09/DB25-05          42   IOPort       None           
P1-11/DB25-06          43   IOPort       None           
P1-13/DB25-07          44   IOPort       None           
P1-15/DB25-08          45   IOPort       None           
P1-17/DB25-09          46   IOPort       None           
P1-19/DB25-10          47   IOPort       None           
P1-21/DB25-11          48   IOPort       None           
P1-23/DB25-12          49   IOPort       None           
P1-25/DB25-13          50   IOPort       None  

Please Log in or Create an account to join the conversation.

More
20 Feb 2023 23:55 - 20 Feb 2023 23:58 #264920 by PCW
Replied by PCW on topic 7i97+7i85 bit file
Sounds like something went wrong with  programming the card: 
I get this:

 

File Attachment:

File Name: 7i97_7i85d.txt
File Size:7 KB



Ahh but I do see an issue with the encoders. I will fix that this evening
 
Attachments:
Last edit: 20 Feb 2023 23:58 by PCW.

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.174 seconds
Powered by Kunena Forum