Safely Flash a Mesa Board
- JT
-
Topic Author
- Away
- Administrator
-
Less
More
- Posts: 1052
- Thank you received: 545
06 Nov 2023 13:34 - 06 Nov 2023 13:39 #284698
by JT
Safely Flash a Mesa Board was created by JT
I've made some improvements to the Mesa Configuration Tool II to verify that the board selected and the address selected are the same as the connected board. With these checks you can't flash the wrong firmware to a Mesa board.
I've also added a board discovery feature that can save you time trying to figure out if you have the board connected as you wanted.
All mesaflash functions use the same checks as those shown in the video.
JT
I've also added a board discovery feature that can save you time trying to figure out if you have the board connected as you wanted.
All mesaflash functions use the same checks as those shown in the video.
JT
Last edit: 06 Nov 2023 13:39 by JT.
The following user(s) said Thank You: tommylight, pommen, oddwick
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 21110
- Thank you received: 7210
06 Nov 2023 13:40 #284700
by tommylight
Replied by tommylight on topic Safely Flash a Mesa Board
Magnificent! 
Thank you.
Thank you.
The following user(s) said Thank You: JT
Please Log in or Create an account to join the conversation.
- FPVUALAB
- Offline
- New Member
-
Less
More
- Posts: 13
- Thank you received: 0
29 Dec 2025 00:58 #340638
by FPVUALAB
Replied by FPVUALAB on topic Safely Flash a Mesa Board
Hello. I have a Mesa7i92TH and I need a pinout for a Chinese board (mach3 interface board) 5Axis Breakout Board. 4 encoders and four axes. Why is there no 7i92t_5abob_encd.bin firmware in Mesa Configuration Tool II (I installed it via the terminal)? Maybe I need different firmware? 7i92t_7i85sx2d.bin, but it's not there either)))
Thank you very much for your help.
Thank you very much for your help.
Please Log in or Create an account to join the conversation.
- JT
-
Topic Author
- Away
- Administrator
-
Less
More
- Posts: 1052
- Thank you received: 545
29 Dec 2025 12:23 - 29 Dec 2025 12:56 #340650
by JT
Replied by JT on topic Safely Flash a Mesa Board
I just updated the 7i92t firmware to include all the latest firmware from Mesa. Select the 7i92t and then Downloads > Firmware to get the latest.
Edit: I also updated the 5i25t, 7i76eu, 7i95t, 7i96s and 7i97t firmware.
JT
Edit: I also updated the 5i25t, 7i76eu, 7i95t, 7i96s and 7i97t firmware.
JT
Last edit: 29 Dec 2025 12:56 by JT.
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.069 seconds