mesa 7i96s failed to parse Module Descriptor 7
- nartburg
- Offline
- Junior Member
-
Less
More
- Posts: 34
- Thank you received: 2
27 Jun 2024 16:59 #303909
by nartburg
mesa 7i96s failed to parse Module Descriptor 7 was created by nartburg
Dear Forum,
I just connected a new Mesa 7i09s confugured the network -- got contact with the card -- executed Pncconf Wizard -- tryed to execute Linuxcnc and got:
..
..
hm2-eth:discovered 7I96S
hm2/hm2_7i96s.0: Low Level init 0.15
board fails HM2 registration
..
..
..
DEBUG FILE INFO:
Note: Using POSIX realtime
hm2/hm2_7i96s.0: num_sserials references 2 instances, but only 1 are available, not loading driver
hm2/hm2:7i96s.0: failed to parse Module Descriptor 7
hm2_eth: rtapi_app_main: Invalid argument(-22)
./ww1.hal9: waitpid failed /usr/bin/rtapi_app hm_eth
..
..
..
please advise
with kind regards
I just connected a new Mesa 7i09s confugured the network -- got contact with the card -- executed Pncconf Wizard -- tryed to execute Linuxcnc and got:
..
..
hm2-eth:discovered 7I96S
hm2/hm2_7i96s.0: Low Level init 0.15
board fails HM2 registration
..
..
..
DEBUG FILE INFO:
Note: Using POSIX realtime
hm2/hm2_7i96s.0: num_sserials references 2 instances, but only 1 are available, not loading driver
hm2/hm2:7i96s.0: failed to parse Module Descriptor 7
hm2_eth: rtapi_app_main: Invalid argument(-22)
./ww1.hal9: waitpid failed /usr/bin/rtapi_app hm_eth
..
..
..
please advise
with kind regards
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 18130
- Thank you received: 4894
27 Jun 2024 17:02 #303910
by PCW
Replied by PCW on topic mesa 7i96s failed to parse Module Descriptor 7
In pncconf, select 7i96s_d firmware
rather than 7i96s_7i74 firmware.
rather than 7i96s_7i74 firmware.
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.056 seconds