-
LinuxCNC
-
LinuxCNC Announcements
-
LinuxCNC Hardware Survey
LinuxCNC Hardware Survey
×
Poll: LinuxCNC Hardware Survey (runs until 2025-12-20 00:00:00)
|
Mesa (all types) |
|
3 |
100%
|
|
Pico (all types) |
|
No votes |
0%
|
|
General Mechatronics |
|
No votes |
0%
|
|
Motenc |
|
No votes |
0%
|
|
Servo-to-Go |
|
No votes |
0%
|
|
PCL720 |
|
No votes |
0%
|
|
Pluto |
|
No votes |
0%
|
|
Vigilant Technologies ENCDAC |
|
No votes |
0%
|
|
TIRO (PC104) |
|
No votes |
0%
|
|
Siemens Evoreg |
|
No votes |
0%
|
|
Axiom AX5241H |
|
No votes |
0%
|
|
Total number of voters: 3 |
|
Only registered users can participate to this poll
|
-
andypugh
-
Topic Author
-
Offline
-
Moderator
-
Less
More
-
Posts: 19714
-
Thank you received: 4570
-
-
20 Nov 2025 23:18 - 20 Nov 2025 23:22 #338840
by andypugh
LinuxCNC supports a wide range of hardware, including a number of obsolete ISA cards etc.
In order to prioritise maintenance of the drivers (and possibly to retire some drivers) it would be useful to know what hardware is out there "in the wild"
Please fill out the survey below selecting any hardware that you use yourself, or have recently seen in use.
(Edit) The poll only appears to allow a single selection, but I have enabled multiple votes per user, so it may be possible to add data for several hardware devices.
Last edit: 20 Nov 2025 23:22 by andypugh.
Please Log in or Create an account to join the conversation.
-
LinuxCNC
-
LinuxCNC Announcements
-
LinuxCNC Hardware Survey
Time to create page: 0.074 seconds
