- Posts: 1029
- Thank you received: 286
Mini wannabe datron build
- ihavenofish
- Topic Author
- Offline
- Platinum Member
-
- tommylight
-
- Offline
- Moderator
-
3 years 6 months ago #270198
by tommylight
Replied by tommylight on topic Mini wannabe datron build
2 replies, so which one did you follow? 
One side note that gets missed sometimes, before installing LinuxCNC always, always do
sudo apt update
sudo apt upgrade
skipping this has a tendency of causing some issues later down the line despite LinuxCNC installing.
One side note that gets missed sometimes, before installing LinuxCNC always, always do
sudo apt update
sudo apt upgrade
skipping this has a tendency of causing some issues later down the line despite LinuxCNC installing.
Please Log in or Create an account to join the conversation.
- ihavenofish
- Topic Author
- Offline
- Platinum Member
-
- ihavenofish
- Topic Author
- Offline
- Platinum Member
-
- ihavenofish
- Topic Author
- Offline
- Platinum Member
-
- tommylight
-
- Offline
- Moderator
-
Time to create page: 0.073 seconds