new emc2 2.5.1 . error on axis x and y.

More
08 Aug 2012 20:35 #22980 by RobotMatic
new version 2.5.1 have a problem. The axis x and y are mirror in comparation with the home axis. the table of the machine is mirror before the home secuence.

!! we are change it?

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 20:56 #22981 by BigJohnT
I have 3 machines running 2.5.1 and all act normally.

Did you upgrade from 2.5.0 to 2.5.1 via the software update prompt?

Did you change anything else when you upgraded?

John

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 22:20 #22982 by RobotMatic
my machine worked normally with 2.5.0.
Today Ubuntu updated to 2.5.1
when I started my emc2. The x and y axis changed the direction.
whit the stepconf wizard I changed the sign of the x and y axis direction.
my emc2 started apparently normal , I could run the home sequence, but when I tried to move the axis X and Y, I realized that the limits of the table were inverted.

I need a solution urgently

thanks !

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 23:43 #22984 by BigJohnT
It is very difficult to understand exactly what your problem is due to the language conversion. Have some patience and we will work this out. Of course the IRC might be faster depending on who is on line at the time.

1 When you home the X and Y axis do they go in the correct direction and home as before?

2 When you jog the X and Y axis do they go in the direction shown on this diagram ?

John

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 23:55 #22985 by RobotMatic
linuxcnc 2.5.0 1 and 2 axis x and y work normally
linuxcnc 2.5.1 1 and 2 axis x and y work in opposite direction with the same .ini

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 11:07 #22991 by BigJohnT
Can you zip up your config and attach it to a post?

John

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 12:28 #22992 by RobotMatic
this is my ini and hal file.

File Attachment:

File Name: 251.zip
File Size:2 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 12:53 #22993 by BigJohnT
To test your config I need all the files from your config directory.

John

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 13:13 #22994 by RobotMatic
i have two machine with this problem. i have two linuxcnc update 2.5 to 2.5.1 with this problem. it is very big problem

thanks

this is my folder conf

File Attachment:

File Name: robotmatic0004.zip
File Size:6 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 13:36 #22995 by RobotMatic
when linuxcnc update 2.5 to .5.1 break the ini file. The solutios is make a new ini file.

thank for your time !!

Please Log in or Create an account to join the conversation.

Time to create page: 0.451 seconds
Powered by Kunena Forum