New Project with Mesa 7I96 and THCAD-05

More
6 years 4 months ago #171550 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
What file do i need to download just get this thing going? From this site www.linuxcnc.org/testing-stretch-rtpreempt/

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #171563 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
OK I did the debian install route and that worked then I downloaded the zip file to get linuxcnc install and it installed 2.9 will that work with mesa cards? I started the pnconfig wizard and went through the steps and went to open the gui and it gives me a error again.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #171564 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #171565 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

File Attachment:

File Name: linuxcnc.report.txt
File Size:5 KB

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #171571 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
I fixed the address for the board on my connections to 10.10.10.11 still get the same error

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #171581 by rodw
Replied by rodw on topic New Project with Mesa 7I96 and THCAD-05
Can you ping the card? If you can't sort out the network side first.
RodW
MrRodW.au
Youtube

Please Log in or Create an account to join the conversation.

Time to create page: 0.410 seconds
Powered by Kunena Forum