hm2_eth.ko
- mjones@welfab.ca
- Offline
- Senior Member
-
Less
More
- Posts: 65
- Thank you received: 2
25 Jul 2021 18:59 #215898
by mjones@welfab.ca
hm2_eth.ko was created by mjones@welfab.ca
I am trying to get a 7i76e to run. i made a quick pncconf and tried to run it. The debug file said it can't find the hm2_eth file. i checked in the location and there it was, gone. no other files with eth in it. so know i'm wandering where i find a hm2_eth.ko file to put where the program is looking for it.
any idea's?
any idea's?
Please Log in or Create an account to join the conversation.
25 Jul 2021 19:12 #215900
by PCW
Replied by PCW on topic hm2_eth.ko
You need a current version of LinuxCNC and a Preempt-RT kernel
to run Mesa Ethernet cards:
linuxcnc.org/downloads/
(the first ISO listed)
to run Mesa Ethernet cards:
linuxcnc.org/downloads/
(the first ISO listed)
Please Log in or Create an account to join the conversation.
- mjones@welfab.ca
- Offline
- Senior Member
-
Less
More
- Posts: 65
- Thank you received: 2
25 Jul 2021 19:23 #215902
by mjones@welfab.ca
Replied by mjones@welfab.ca on topic hm2_eth.ko
any idea what one would run best with my system?
Linux hard 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686 GNU/Linux
Linux hard 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686 GNU/Linux
Please Log in or Create an account to join the conversation.
25 Jul 2021 19:26 #215903
by PCW
Replied by PCW on topic hm2_eth.ko
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17802
- Thank you received: 5920
25 Jul 2021 22:20 #215909
by tommylight
Replied by tommylight on topic hm2_eth.ko
Or the current version:
www.linuxcnc.org/iso/linuxcnc-2.8.2-buster.iso
www.linuxcnc.org/iso/linuxcnc-2.8.2-buster.iso
Please Log in or Create an account to join the conversation.
26 Jul 2021 01:54 #215924
by PCW
Replied by PCW on topic hm2_eth.ko
It would be nice if that was on the LinuxCNC downloads page...
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17802
- Thank you received: 5920
26 Jul 2021 10:19 #215944
by tommylight
Replied by tommylight on topic hm2_eth.ko
Yes it would.
2.8.2 has a lot of stuff fixed from standard Debian thanks to Andy.
2.8.2 has a lot of stuff fixed from standard Debian thanks to Andy.
Please Log in or Create an account to join the conversation.
31 Jul 2021 23:37 #216527
by andypugh
Replied by andypugh on topic hm2_eth.ko
Sorry I forgot to update the links.
Fixed now.
Fixed now.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.366 seconds