7i97t and qtplasmac
- rubennavarroc
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
14 Oct 2025 09:51 #336419
by rubennavarroc
7i97t and qtplasmac was created by rubennavarroc
I'm new to cnc and linuxcnc in general. I'm trying to create a mesa 7i97t config file with Mesa CT but I don't see the option to use QtPlasmaC as the GUI. Is there any way to to this?
Please Log in or Create an account to join the conversation.
- langdons
-
- Offline
- Platinum Member
-
Less
More
- Posts: 660
- Thank you received: 67
14 Oct 2025 21:55 #336454
by langdons
Replied by langdons on topic 7i97t and qtplasmac
I would use AXIS at first; it's simple stable, and generally bug-free (except for the occasional regression).
AXIS is the best GUI for beginners IMO.
Try it out!
If you don't like it, then switch to QtPlasmaC.
AXIS is the best GUI for beginners IMO.
Try it out!
If you don't like it, then switch to QtPlasmaC.
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 17302
- Thank you received: 5035
14 Oct 2025 22:44 - 14 Oct 2025 22:47 #336460
by PCW
Replied by PCW on topic 7i97t and qtplasmac
Here is a suggestion:
forum.linuxcnc.org/plasmac/55286-servo-d...ofit?start=10#331245
( pncconf has more built-in QTPlasmaC/THCAD support so may be an easier path)
forum.linuxcnc.org/plasmac/55286-servo-d...ofit?start=10#331245
( pncconf has more built-in QTPlasmaC/THCAD support so may be an easier path)
Last edit: 14 Oct 2025 22:47 by PCW.
The following user(s) said Thank You: langdons
Please Log in or Create an account to join the conversation.
Time to create page: 0.066 seconds