PNCCONF and Mesa 7I80
- Roguish
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 315
- Thank you received: 31
25 Jun 2021 14:18 - 25 Jun 2021 14:19 #212903
by Roguish
PNCCONF and Mesa 7I80 was created by Roguish
hey all. not sure where to report this.....
when running pncconf for a 7i80 config, the hal file has pins as '7i80hd'
but when actually running a 7i80 the pins in the bit files are '7i80' without the 'hd' suffix.
the hal files require an easy replace all edit.
I recommend altering pncconf.
when running pncconf for a 7i80 config, the hal file has pins as '7i80hd'
but when actually running a 7i80 the pins in the bit files are '7i80' without the 'hd' suffix.
the hal files require an easy replace all edit.
I recommend altering pncconf.
Last edit: 25 Jun 2021 14:19 by Roguish.
Please Log in or Create an account to join the conversation.
- CNC4Life
- Offline
- Junior Member
-
Less
More
- Posts: 28
- Thank you received: 2
29 Jun 2021 03:21 #213209
by CNC4Life
Replied by CNC4Life on topic PNCCONF and Mesa 7I80
I can confirm this issue, it drove me crazy. I had no experience it was easy to overlook. I was using 2.8.1.
Please Log in or Create an account to join the conversation.
- Roguish
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 315
- Thank you received: 31
30 Jun 2021 03:23 #213303
by Roguish
Replied by Roguish on topic PNCCONF and Mesa 7I80
I'm going to put in an 'Feature Issue' report thingy. I'll get fixed. Should be easy.
thanks for confirming....
thanks for confirming....
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.065 seconds