Plasma Square

More
06 Oct 2011 23:51 - 06 Oct 2011 23:51 #13719 by BigJohnT
Plasma Square was created by BigJohnT
I created a subroutine for ngcgui that cuts a square with radius corners on my plasma torch.

John

File Attachment:

File Name: square.ngc
File Size:1 KB
Attachments:
Last edit: 06 Oct 2011 23:51 by BigJohnT.

Please Log in or Create an account to join the conversation.

More
06 Oct 2011 23:52 - 06 Oct 2011 23:52 #13720 by BigJohnT
Replied by BigJohnT on topic Re:Plasma Square
It uses findtop to set the Z 0.000 for the material...

John

File Attachment:

File Name: findtop.ngc
File Size:0 KB
Attachments:
Last edit: 06 Oct 2011 23:52 by BigJohnT.

Please Log in or Create an account to join the conversation.

More
06 Oct 2011 23:54 - 06 Oct 2011 23:54 #13721 by BigJohnT
Replied by BigJohnT on topic Re:Plasma Square
and ngctouch to start the torch and set the pierce height, cut height and pierce delay.

John

File Attachment:

File Name: ngctouch.ngc
File Size:0 KB
Attachments:
Last edit: 06 Oct 2011 23:54 by BigJohnT.

Please Log in or Create an account to join the conversation.

Time to create page: 0.061 seconds
Powered by Kunena Forum