QtQuickVCP and LinuxCNC 2.8

9 years 5 months ago #93621 by dewayne

QtQuickVCP and LinuxCNC 2.8 was created by dewayne

QtQuickVCP I see it being used with MachineKit Branch, can anyone tell me if it will work with LinuxCNC 2.8 Master.

Please Log in or Create an account to join the conversation.

9 years 5 months ago #93667 by andypugh

Replied by andypugh on topic QtQuickVCP and LinuxCNC 2.8

There is a QTVCP development branch.

github.com/LinuxCNC/linuxcnc/tree/qt5vcp_master

You now know all about it that I do :-)

Please Log in or Create an account to join the conversation.

Moderators: HansU

Time to create page: 0.179 seconds