moving from WinPC-NC to LinuxCNC
04 Dec 2012 22:53 #27194
by daedalus
moving from WinPC-NC to LinuxCNC was created by daedalus
Hello,
I'm new here and already have a question.
I have a working configuration for WinPC-NC and I would like to move to LinuxCNC.
Is there a compiled list with the correspondence of parameters between them?
I have attached my WinPC-NC configuration.
I'm new here and already have a question.
I have a working configuration for WinPC-NC and I would like to move to LinuxCNC.
Is there a compiled list with the correspondence of parameters between them?
I have attached my WinPC-NC configuration.
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:01 #27196
by BigJohnT
Replied by BigJohnT on topic moving from WinPC-NC to LinuxCNC
It seems your attachment failed to attach, might not be a supported extension.
What type of machine is this?
John
What type of machine is this?
John
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:15 - 04 Dec 2012 23:19 #27198
by daedalus
Replied by daedalus on topic moving from WinPC-NC to LinuxCNC
Hello,
It is a cncconcept portal milling machine.
I don't know if I am allowed to put here a link to the ebay site.
Here is the attachment, inline (sorry):
It is a cncconcept portal milling machine.
I don't know if I am allowed to put here a link to the ebay site.
Here is the attachment, inline (sorry):
WinPC-NC Machine Setup File
--- WPI ---
WW=3
MX=300000
MY=200000
MZ=100000
NX=0
NY=0
NZ=0
SP=0
PX=0
PY=0
PZ=0
CB=5
CD=3
CS=0
CP=0
CC=0
UX=756187
UY=122868
UZ=2600
SS=0
EZ=300
AZX=1600
AZY=1600
AZZ=1600
ANX=4000
ANY=4000
ANZ=4000
MA=3
SX=1000
SY=1000
AC=1
FX=1
FY=0
FZ=0
GR1X=8000
GR1Y=8000
GR1Z=8000
GR2X=500
GR2Y=500
GR2Z=500
GM1X=58333
GM1Y=58333
GM1Z=40000
GM2X=1000
GM2Y=1000
GM2Z=1000
GEX=58333
GEY=58333
GEZ=40000
GSX=1000
GSY=1000
GSZ=1000
RMPX=700
RMPY=700
RMPZ=700
GMX=60000
GMY=60000
GMZ=40000
RRX=0
RRY=0
RRZ=0
RR=0
TOP=5000
TOF=5000
TOB=3000
SA=0
SEP=0
KR=500
LF=0
WZ=0
WNS=0
WNH=0
NP=1
OEM=0
WSP=0
WAS=0
WST=0
REL=1
AW=0
TX=0
AI=1
SPX=0
SPY=0
GI=0
GMAX=50000
DI=0
DREH=18000
EINH=1
JCX=0
JCY=0
DPX=0
DPY=0
DNX=0
DNY=0
JSTCK=0
JSNR=20
JSMIN=5
JSPR=50
SZEIT=100
ZINV=1
TLIFT=0
NNL=0
PCC=0
AL=1
DJ=0
TO=0
RRM=0
ZCL=0
PWNO=0
PWDA=0
PWAK=0
SZ=1000
LVZ=0
SDREH=1000
BOSCH=0
PA00=0
REP5=0
LOG=0
ABMX=1280000
ABMY=700000
ABMZ=125000
ABNX=0
ABNY=0
ABNZ=0
CVMIN=5
DSAUS=0
DSEIN=0
WZO=0
EHG=1
WWX1=0
WWX2=0
WWX3=0
WWX4=0
WWX5=0
WWX6=0
WWX7=0
WWX8=0
WWX9=0
WWX10=0
WWY1=0
WWY2=0
WWY3=0
WWY4=0
WWY5=0
WWY6=0
WWY7=0
WWY8=0
WWY9=0
WWY10=0
PRGW=0
OMAK=1
WWZ1=0
WWZ2=0
WWZ3=0
WWZ4=0
WWZ5=0
WWZ6=0
WWZ7=0
WWZ8=0
WWZ9=0
WWZ10=0
BREU=0
IGSIG=0
SURBL=0
WLENX=0
WLENY=0
WLENZ=0
WLENA=0
MAK2P=0
TP2P=0
SZDZ=0
EDTL=0
MBS=50
DM2=1
X4AZ=2880
X4AN=4000
X4OFF=0
X4F=0
X4RR=0
X4RF=0
X4U=1000
X4GR1=10000
X4GR2=1000
X4GM1=10000
X4GM2=1000
X4GE=10000
X4PROG=0
GUPD1=1000000
GUPD2=5000000
SKLF=0
NOAO=0
NOMB=1
NOZD=1
RARAD=0
RAENA=0
SCHNENA=0
SCHNW1=10
SCHNW2=45
SCHNH=3000
NUANZX=1
NUANZY=1
NUDIFFX=0
NUDIFFY=0
OVRRESET=0
ZTINVERT=0
LAUTOMESS=0
SENSAUTO=0
SENSREF=0
NOSTOP=0
POSSPEICH=0
NCDREHEN=0
MBC=0
WWU1=0
WWU2=0
WWU3=0
WWU4=0
WWU5=0
WWU6=0
WWU7=0
WWU8=0
WWU9=0
WWU10=0
ZAXDIS=0
RESUME=0
AUSHEBPUPD=0
DREH360=0
VATER=0
MAKIA=1
REFFREI=0
X4GS=1000
X4RMP=100
X4GM=10000
NCFENSTER=0
ATCNOSTOP=0
NOAMHP=0
NOAMAI=0
NO3DATG0=0
REFIST000=1
MMELD1=---
MMELD2=---
MMELD3=---
MMELD4=---
MMELD5=---
MMELD6=---
MMELD7=---
MMELD8=---
MMELD9=---
MMELD10=---
MBILD1=
MBILD2=
MBILD3=
MBILD4=
MBILD5=
MBILD6=
MBILD7=
MBILD8=
MBILD9=
MBILD10=
MSTOP1=0
MSTOP2=0
MSTOP3=0
MSTOP4=0
MSTOP5=0
MSTOP6=0
MSTOP7=0
MSTOP8=0
MSTOP9=0
MSTOP10=0
MQUIT1=0
MQUIT2=0
MQUIT3=0
MQUIT4=0
MQUIT5=0
MQUIT6=0
MQUIT7=0
MQUIT8=0
MQUIT9=0
MQUIT10=0
LSCHNELL=0
REFPOSX=0
REFPOSY=0
REFPOSZ=0
FORCEHOM=0
LPT1PORT=888
LPT2PORT=0
OFFSETX=0
OFFSETY=0
OFFSETZ=0
SPIELX=0
SPIELY=0
SPIELZ=0
TAKTLAENGE=20
NOPRJPAR=0
BAHNFAKTOR=0
JOGENDLESS=0
INVDINR=1
SCHNENA2=0
SINUMERIK=0
X4NULLREIHE=0
TAKTINV=1
REFJOB=0
STOPUHR=1
EXTEDIT=
POSANZ=0
POSANZDEL=20
OLZKORR=0
ENDLESSRST=0
ATCZN0=0
WLNULL=0
WWCXA=0
WWCXP=0
WWCYA=0
WWCYP=0
WWCZA=0
WWCZP=0
WLDONE=0
HAUBESCHNELL=0
OVRALL=0
SURBL2=0
ATCRC=500
ATCRCMAN=0
WLENMAXZ=100000
FILOUFILEPAR=0
MAAS=0
ZELLER=0
FARB3D=0
WLSICHERN=1
GALL=0
--- WPW ---
WT1=1000
WT2=1000
WT3=1000
WT4=1000
WT5=1000
WT6=1000
WT7=1000
WT8=1000
WT9=1000
WT10=1000
WE1=5000
WE2=5000
WE3=5000
WE4=5000
WE5=5000
WE6=5000
WE7=5000
WE8=5000
WE9=5000
WE10=5000
WV1=5000
WV2=5000
WV3=5000
WV4=5000
WV5=5000
WV6=5000
WV7=5000
WV8=5000
WV9=5000
WV10=5000
WA1=1
WA2=1
WA3=1
WA4=1
WA5=1
WA6=1
WA7=1
WA8=1
WA9=1
WA10=1
WF1=255
WF2=16744448
WF3=65408
WF4=16744703
WF5=33023
WF6=128
WF7=0
WF8=8421504
WF9=65535
WF10=32896
WAU1=10000
WAU2=10000
WAU3=10000
WAU4=10000
WAU5=10000
WAU6=10000
WAU7=10000
WAU8=10000
WAU9=10000
WAU10=10000
WBD1=30
WBD2=30
WBD3=30
WBD4=30
WBD5=30
WBD6=30
WBD7=30
WBD8=30
WBD9=30
WBD10=30
WB1=Werkzeug 1
WB2=Werkzeug 2
WB3=Werkzeug 3
WB4=Werkzeug 4
WB5=Werkzeug 5
WB6=Werkzeug 6
WB7=Werkzeug 7
WB8=Werkzeug 8
WB9=Werkzeug 9
WB10=Werkzeug 10
WD1=100
WD2=100
WD3=100
WD4=100
WD5=100
WD6=100
WD7=100
WD8=100
WD9=100
WD10=100
WPW1=0
WPW2=0
WPW3=0
WPW4=0
WPW5=0
WPW6=0
WPW7=0
WPW8=0
WPW9=0
WPW10=0
WZK1=0
WZK2=0
WZK3=0
WZK4=0
WZK5=0
WZK6=0
WZK7=0
WZK8=0
WZK9=0
WZK10=0
WLEN1=0
WLEN2=0
WLEN3=0
WLEN4=0
WLEN5=0
WLEN6=0
WLEN7=0
WLEN8=0
WLEN9=0
WLEN10=0
WLENR=0
--- MAC ---
--- KEYS ---
--- SYS ---
AA=3
SS=0
PR=0
RMP=9
M2TZ=200
PS=1
RQ=1
LWHS=1
NGS=0
NGM=0
RP=0
VZ=5
PW=1
RZ=250
RR=1
MG=50000
SG=5000
DA=0
DY=17
BSZ=0
RMIN=3000
RMAX=100000
RD=0
TZ=200
RPMIN=30
RPMAX=50
RPANZ=3
RNANZ=3
RST=5
DP=0
SQ=3
MKBD=0
RES1=0
RES2=0
SPS=0
SIGEA=0
KF=0
INCCM=1
RES4=0
RES5=0
RES6=0
ASTART=0
RES7=0
RES8=0
RES9=0
RES10=0
INLAD=0
RES12=1
RES13=0
RES14=0
TINV=1
PZEIT=2
KBSIG=0
RZ1=700
RZ2=700
RZ3=700
RZ4=100
MG1=60000
MG2=60000
MG3=40000
MG4=10000
SG1=1000
SG2=1000
SG3=1000
SG4=1000
ESRAMP=0
SPORT=888
RES16=0
RES17=0
RES18=0
PWMGF=200
KIT=0
RES21=0
RES22=0
TOGGF=0
REFRESH=10
S0=58333,30
S1=58333,30
S2=40000,30
S3=11666,30
S4=11666,30
S5=8000,30
S6=10000,30
S7=2000,30
S8=10000,30
S9=10000,30
S10=5000,30
S11=2000,30
S12=5000,30
S13=5000,30
S14=30000,30
S15=160000,30
S16=170000,30
S17=180000,30
S18=190000,30
S19=30000,30
S20=8333,30
S21=10000,30
S22=8333,30
S23=10000,30
S24=250000,30
S25=260000,30
S26=270000,30
S27=280000,30
S28=40000,30
S29=1000,30
S30=10000,30
S31=10000,30
S32=10000,30
S33=10000,30
S34=350000,30
S35=360000,30
S36=370000,30
S37=380000,30
S38=390000,30
S39=10000,30
S40=10000,30
S41=420000,30
S42=430000,30
S43=440000,30
S44=450000,30
S45=460000,30
S46=470000,30
S47=480000,30
S48=490000,30
S49=500000,30
S50=510000,30
S51=520000,30
S52=530000,30
S53=540000,30
S54=550000,30
S55=560000,30
S56=570000,30
S57=580000,30
S58=590000,30
S59=600000,30
S60=610000,30
S61=620000,30
S62=630000,30
S63=640000,30
S64=650000,30
S65=660000,30
S66=670000,30
S67=680000,30
S68=690000,30
S69=700000,30
S70=750000,30
S71=800000,30
S72=850000,30
S73=900000,30
S74=950000,30
S75=1000000,30
S76=100,30
S77=100,30
S78=100,30
S79=58333,30
S80=58333,30
S81=40000,30
S82=10000,30
S83=1000,30
S84=1000,30
S85=1000,30
S86=1000,30
S87=100,30
S88=100,30
S89=8000,30
S90=8000,30
S91=8000,30
S92=10000,30
S93=500,30
S94=500,30
S95=500,30
S96=1000,30
S97=1500,30
S98=50000,30
S99=1000000,30
A0=1600,4000,0,1
A1=1600,4000,0,0
A2=1600,4000,0,0
A3=2880,4000,0,0
R0=89,93,89,0,0
R1=90,94,90,0,0
R2=91,95,91,0,0
R3=92,96,92,0,0
I221=379h,4,1
I235=379h,5,0
I236=379h,7,1
I237=379h,6,0
Q242=37Ah,0,1
Q243=37Ah,1,1
Q251=37Ah,2,0
--- END ---
Last edit: 04 Dec 2012 23:19 by BigJohnT. Reason: add code tags
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:20 - 04 Dec 2012 23:21 #27200
by BigJohnT
Replied by BigJohnT on topic moving from WinPC-NC to LinuxCNC
No problem adding links to manuals and hardware you have questions about.
I added code tags for you.
John
I added code tags for you.
John
Last edit: 04 Dec 2012 23:21 by BigJohnT.
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:23 #27201
by daedalus
Replied by daedalus on topic moving from WinPC-NC to LinuxCNC
Thank you John.
Here is the link with the description of the machine:
www.ebay.de/itm/CNC-Fraesmaschine-Fraese...ory=162&cmd=ViewItem
daedalus
Here is the link with the description of the machine:
www.ebay.de/itm/CNC-Fraesmaschine-Fraese...ory=162&cmd=ViewItem
daedalus
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:28 #27202
by cncbasher
Replied by cncbasher on topic moving from WinPC-NC to LinuxCNC
winpc-nc as far as I am aware is parrell port based , most of these are quite reasonably standard in pinouts .
and usualy but not always follow Mach3 style with step direction pins being x axis on 2,3 y axis on 4,5 z axis 6,7 etc
look in the examples for zylotex and sherline configurations and you should be close ..
however if you can give more information on the actual electronics interface or even some pictures we may be able to help
I doubt directly if the winpc structure could be directly converted .
if the ebay link has reference by all means post it
and usualy but not always follow Mach3 style with step direction pins being x axis on 2,3 y axis on 4,5 z axis 6,7 etc
look in the examples for zylotex and sherline configurations and you should be close ..
however if you can give more information on the actual electronics interface or even some pictures we may be able to help
I doubt directly if the winpc structure could be directly converted .
if the ebay link has reference by all means post it
Please Log in or Create an account to join the conversation.
04 Dec 2012 23:47 #27206
by daedalus
Replied by daedalus on topic moving from WinPC-NC to LinuxCNC
cnbasher, I think you are right.
Bellow is what I have found in the machine manual for LPT:
I'm going now to garage and give it a test.
Bellow is what I have found in the machine manual for LPT:
Pin 2 AUS Richtung Motor X
Pin 3 AUS Takt Motor X
Pin 4 AUS Richtung Motor Y
Pin 5 AUS Takt Motor Y
Pin 6 AUS Richtung Motor Z
Pin 7 AUS Takt Motor Z
Pin 8 AUS reserviert
Pin 9 AUS reserviert
Pin 1 AUS Bohrspindel an/aus (default)
Pin 14 AUS Kühlmittelpumpe an/aus (default)
Pin 16 AUS Stromabsenkung (default)
Pin 17 AUS Job läuft (default)
Pin 10 EIN Referenzschalter X (default)
Pin 11 EIN Referenzschalter Y (default)
Pin 12 EIN Referenzschalter Z (default)
Pin 13 EIN Taster/Tasterblock (default)
Pin 15 EIN frei
Pin 18-25 Signalmasse (0V GND)Please Log in or Create an account to join the conversation.
05 Dec 2012 02:58 #27211
by cncbasher
Replied by cncbasher on topic moving from WinPC-NC to LinuxCNC
yes that's all you need ,
pin2 = direction
pin3 = step
if my german is anything to go by
pin1 = spindle motor
pin14 = suds pump
home switches 10 , 11, 12
pin2 = direction
pin3 = step
if my german is anything to go by
pin1 = spindle motor
pin14 = suds pump
home switches 10 , 11, 12
The following user(s) said Thank You: daedalus
Please Log in or Create an account to join the conversation.
05 Dec 2012 05:00 #27213
by daedalus
Replied by daedalus on topic moving from WinPC-NC to LinuxCNC
Thank you cncbasher, I have now a working configuration.
daedalus
daedalus
Please Log in or Create an account to join the conversation.
Time to create page: 0.521 seconds