EMC2..HELP!

I have linuxcnc 8.04 and I downloaded EMC2:

linux.softpedia.com/get/Science-and-Engi...ion/EMC2-42843.shtml

and

wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_EMC2

I can't install EMC2 and I don't know like do it by terminal


Help!

I have linuxcnc 8.04 and ......
wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_EMC2
I can't install EMC2 and I don't know like do it by terminal

All you have to do is follow the instructions in the link you pasted
wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_EMC2

Then download the file linked in it linuxcnc.org/hardy/emc2-install.sh and run it by double clicking on it from File Manager

If you are having difficulty understanding the English documents, put them through Babel Fish or Google Translate.

I downloaded EMC2:
linux.softpedia.com/get/Science-and-Engi...ion/EMC2-42843.shtml

Don't download anything from other sites, at best it will just be a link to this site at worst could contain anything.

regards

markrath wrote:

I have linuxcnc 8.04 and I downloaded EMC2:

linux.softpedia.com/get/Science-and-Engi...ion/EMC2-42843.shtml


Help!

Why install a nearly year-old copy from an unknown site when you can get the latest
version directly from the group's own web site?

Jon