broken URL link
23 Feb 2016 23:16 #70542
by gzcwnk
broken URL link was created by gzcwnk
wiki.linuxcnc.org/cgi-bin/wiki.pl?Instal...the_LinuxCNC_Live_CD
1.1. Installing Ubuntu and LinuxCNC from the LinuxCNC Live-CD
If you do not already have a Linux system, then you can install Ubuntu Linux and LinuxCNC at the same time. Just follow the beginning instructions down through "trying it out..." on [Basic Installation] <
gives a 404.
1.1. Installing Ubuntu and LinuxCNC from the LinuxCNC Live-CD
If you do not already have a Linux system, then you can install Ubuntu Linux and LinuxCNC at the same time. Just follow the beginning instructions down through "trying it out..." on [Basic Installation] <
gives a 404.
Please Log in or Create an account to join the conversation.
23 Feb 2016 23:20 #70543
by andypugh
Replied by andypugh on topic broken URL link
Unfortunately the Wiki is user-written and poorly maintained. Very little of that page is currently relevant. (Ubuntu 8.04 is from 2008!)
linuxcnc.org/docs/2.7/html/getting-start...etting-linuxcnc.html
Is very much more up-to-date.
linuxcnc.org/docs/2.7/html/getting-start...etting-linuxcnc.html
Is very much more up-to-date.
Please Log in or Create an account to join the conversation.
Time to create page: 0.060 seconds