New install LixuxCNC with Sheetcam
- kalio
- Offline
- New Member
-
Less
More
- Posts: 9
- Thank you received: 0
19 Oct 2016 07:09 #81824
by kalio
New install LixuxCNC with Sheetcam was created by kalio
Hi all
I have a problem with installing sheecam'a
for the pure version of Debian Wheezy LInuxCNC can not install Sheetcam
missing during the installation libraries libc6 version 2.15
Do you have any advice on this?
I have a problem with installing sheecam'a
for the pure version of Debian Wheezy LInuxCNC can not install Sheetcam
missing during the installation libraries libc6 version 2.15
Do you have any advice on this?
Please Log in or Create an account to join the conversation.
- lincamx
- Offline
- Junior Member
-
Less
More
- Posts: 29
- Thank you received: 4
20 Oct 2016 02:57 #81880
by lincamx
Replied by lincamx on topic New install LixuxCNC with Sheetcam
You can get libc6 2.19 from Debian jessie non-free repo.
That is how I was able to install sheetcam
That is how I was able to install sheetcam
Please Log in or Create an account to join the conversation.
Time to create page: 0.060 seconds