CamPy
- partec
- Offline
- Elite Member
-
Less
More
- Posts: 178
- Thank you received: 24
02 Apr 2019 13:19 #130155
by partec
Debian Stretch Tricks, Info & Resources was created by partec
www.linuxcnc.org/testing-stretch-rtpreem...uspace-amd64-r13.iso
installed for simple use with axis:
CamPY Camera Edge Finder works fine but the final install script
sudo python CamPY_setup.py
comes up with error
import apt in line 23
installed for simple use with axis:
CamPY Camera Edge Finder works fine but the final install script
sudo python CamPY_setup.py
comes up with error
import apt in line 23
Please Log in or Create an account to join the conversation.
- nicbit
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 2
11 Apr 2019 21:38 #130696
by nicbit
Replied by nicbit on topic Debian Stretch Tricks, Info & Resources
Please install python-apt using the command:
sudo apt install python-apt
I had the same problem but now the camera is working Ok.
Regards,
sudo apt install python-apt
I had the same problem but now the camera is working Ok.
Regards,
The following user(s) said Thank You: billykid, partec
Please Log in or Create an account to join the conversation.
- partec
- Offline
- Elite Member
-
Less
More
- Posts: 178
- Thank you received: 24
12 Apr 2019 00:36 #130703
by partec
Replied by partec on topic Debian Stretch Tricks, Info & Resources
thank you, this works great, perfect
Please Log in or Create an account to join the conversation.
- pl7i92
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1872
- Thank you received: 357
12 Apr 2019 06:13 #130719
by pl7i92
Replied by pl7i92 on topic Debian Stretch Tricks, Info & Resources
this shoudt be in the README at the pycam setup
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds