The case for Debian Bookworm and the 6.1 kernel (including installation notes)

Are the failing results here normal?
github.com/rodw-au/linuxcnc/actions/runs/4940799015
I'm assuming it's because we don't have a Bookworm buildbot

JPL wrote:

...And why isn't this a sticky?
image missing /media/kunena/emoticons/wink.png

The release of b hookworm is less than one month away on June 10, 2023
I have sent a pull request to Linuxcnc to update the Getting LinuxCNC  document for inclusion in the 2.9 docs
github.com/LinuxCNC/linuxcnc/pull/2496
It's hard to read there, so it's probably better to read it on my fork of Linuxcnc.
github.com/rodw-au/linuxcnc/blob/rodw-ge...etting-linuxcnc.adoc
But even better if you copy the raw file and past it into an online asciidoc editor. I used this one.
www.tutorialspoint.com/online_asciidoc_editor.php
past the text in and press execute.

Many thanks to Vector for helping out.

unbeliveable!!!
xanmod is better than preempt_rt for me.
 

I build the new RT Kernel 6.4-rc2
If some wants to use it...
drive.google.com/drive/folders/1HceAcPQd...u4zS9?usp=share_link
In my case the network latency is better and stable to the 6.3. version.
 

Yes, have been waiting until the patches were published and that happened yesterday! 
PCW said 6.4 was an improvement..

There is a lot happening in the RT space right now.