Trying to setup BBB with MachineKit

Hi
( Sorry for my long introduction
I'm aware that this might be not the best forum, but I'm neither a Linux guru nor think I'll ever become one.
And do not wan't to be a member in every in forum. Like to stay concentrated an few Linuxcnc is very good!
And as the hw is so cheap, others might try the same way and like to read expirences on low skilleds...
)

I read all the availabe forums and blogs. Nice and good descriptions.

I got my BBB and was indeed forced to get chrome. IE does not work properly.
I'm on W7/64 Ultimate and after installing the driver package i got it running fine via USB.
I downloaded the proposed image, for having a failsave. Loading works as described.
Than I downloaded MachineKit image. ok . Also transfer to a USB,

Yes I need USB hub for having contact at the same time to SD and the USB memory.
No, I -could not use BBB internal SD slot for that.
No, modern USB3 hub does not work (DELOCK) had to use an old USB2.
Heureka finaly I see all disks, as described in MachinKit for non Linux description..

But now I'm on a dead end and would like if somebody coud give me the solution....

THX in advance Mike

Here ther log plus the error description i can not solve:


Host/IP or SSH URL [localhost]:
Port [22]:
User: root
Connecting to ssh://root@localhost:22

rroot@localhost's password:
root@beaglebone:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 1738184 1227924 420296 75% /
/dev/root 1738184 1227924 420296 75% /
devtmpfs 255280 0 255280 0% /dev
tmpfs 255408 4 255404 1% /dev/shm
tmpfs 255408 264 255144 1% /run
tmpfs 255408 0 255408 0% /sys/fs/cgroup
tmpfs 255408 8 255400 1% /tmp
/dev/mmcblk0p1 71133 55238 15895 78% /media/BEAGLEBONE
/dev/sdb1 7830528 62528 7768000 1% /media/BEAGLEBONE2
/dev/sda1 3940288 2578444 1361844 66% /media/MIKEPE

root@beaglebone:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 1738184 1229600 418620 75% /
/dev/root 1738184 1229600 418620 75% /
devtmpfs 255280 0 255280 0% /dev
tmpfs 255408 4 255404 1% /dev/shm
tmpfs 255408 264 255144 1% /run
tmpfs 255408 0 255408 0% /sys/fs/cgroup
tmpfs 255408 8 255400 1% /tmp
/dev/mmcblk0p1 71133 55238 15895 78% /media/BEAGLEBONE
/dev/sdb1 7830528 62528 7768000 1% /media/BEAGLEBONE2
/dev/sda1 3940288 2578444 1361844 66% /media/MIKEPE

root@beaglebone:~# cd /media/MIKEPE/MachineKit

root@beaglebone:/media/MIKEPE/MachineKit# ls
3.7.10-x12-dtbs.tar.gz initrd.img-3.2.42-psp27 uInitrd-3.2.42-psp27 vmlinuz-3.2.42-psp27
3.8.13xenomai-bone20-dtbs.tar.gz initrd.img-3.7.10-x12 uInitrd-3.7.10-x12 vmlinuz-3.7.10-x12
armhf-rootfs-debian-wheezy.tar initrd.img-3.8.13xenomai-bone20 uInitrd-3.8.13xenomai-bone20 vmlinuz-3.8.13xenomai-bone20
hwpack setup_sdcard.sh user_password.list

root@beaglebone:/media/MIKEPE/MachineKit# bash ./setup_sdcard.sh --mmc /dev/sdb --uboot bone_dtbhinekit-armhf-2013-06

I see...
/sbin/fdisk -l:
Disk /dev/mmcblk0: 1920 MB, 1920991232 bytes
Disk /dev/mmcblk0boot1: 1 MB, 1048576 bytes
Disk /dev/mmcblk0boot0: 1 MB, 1048576 bytes
Disk /dev/sda: 4043 MB, 4043309056 bytes
Disk /dev/sdb: 8026 MB, 8026849280 bytes

lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 3.8G 0 disk
`-sda1 8:1 1 3.8G 0 part /media/MIKEPE
sdb 8:16 1 7.5G 0 disk
`-sdb1 8:17 1 7.5G 0 part /media/BEAGLEBONE2
mmcblk0boot0 179:8 0 1M 1 disk
mmcblk0boot1 179:16 0 1M 1 disk
mmcblk0 179:0 0 1.8G 0 disk
|-mmcblk0p1 179:1 0 70.6M 0 part /media/BEAGLEBONE
`-mmcblk0p2 179:2 0 1.7G 0 part /

Are you 100% sure, on selecting [/dev/sdb] (y/n)? y

Debug: image has bone device tree kernel support: v3.8.13xenomai-bone20
Debug: image has bone kernel support: v3.2.42-psp27
Debug: image has omap kernel support: v3.7.10-x12

---

ERROR: This script does not currently recognize the selected: option..
Please rerun setup_sdcard.sh with a valid option from the list below:

---

TI:
beagle_bx - <BeagleBoard Ax/Bx>
beagle_cx - <BeagleBoard Cx>
beagle_xm - <BeagleBoard xMA/B/C>
bone - <BeagleBone Ax>
igepv2 - <serial mode only>
panda - <PandaBoard Ax>
panda_es - <PandaBoard ES>
Freescale:
mx51evk - <i.MX51 "Babbage" Development Board>
mx53loco - <i.MX53 Quick Start Development Board>
mx53loco_dtb - <i.MX53 Quick Start Development Board>
mx6qsabrelite - <boundarydevices.com/products/sabre-lite-imx6-sbc/>;

---