Updating pncconf for 7i95t
- alexandrap
- Offline
- New Member
-
Less
More
- Posts: 8
- Thank you received: 0
04 Jun 2025 16:17 #329701
by alexandrap
Replied by alexandrap on topic Updating pncconf for 7i95t
Unfortunately, I don't have the 7i95T board assembled yet - I'm waiting for some parts - only the servo is provisionally connected. If I create a simple x-configuration in Config Tool 2, I can move the servo.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 20336
- Thank you received: 6916
04 Jun 2025 17:04 #329702
by tommylight
Replied by tommylight on topic Updating pncconf for 7i95t
A friendly warning:
Never ever plug or unplug the 5V connector to Mesa board while the power supply is on!!!
Never ever plug or unplug the 5V connector to Mesa board while the power supply is on!!!
Please Log in or Create an account to join the conversation.
- alexandrap
- Offline
- New Member
-
Less
More
- Posts: 8
- Thank you received: 0
04 Jun 2025 17:45 #329706
by alexandrap
Replied by alexandrap on topic Updating pncconf for 7i95t
Yes, it is still disconnected because I am waiting for the installation of the fast overvoltage electronic efuse TPS2596
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 20336
- Thank you received: 6916
04 Jun 2025 21:45 #329715
by tommylight
I do not think any fuse is faster than silicium/silicone inside the chips.
Put a switch on the primary side of the power supply.
Replied by tommylight on topic Updating pncconf for 7i95t
To the 5V Mesa power?Yes, it is still disconnected because I am waiting for the installation of the fast overvoltage electronic efuse TPS2596
I do not think any fuse is faster than silicium/silicone inside the chips.
Put a switch on the primary side of the power supply.
Please Log in or Create an account to join the conversation.
- alexandrap
- Offline
- New Member
-
Less
More
- Posts: 8
- Thank you received: 0
05 Jun 2025 06:57 - 05 Jun 2025 06:59 #329728
by alexandrap
Replied by alexandrap on topic Updating pncconf for 7i95t
texas instruments TPS2596 - 2.7 to 19 V, 0.125 to 2-A, 89-mΩ eFuse With Accurate Current Monitor and Fast Overvoltage Protection
Adjustable overvoltage lockout (OVLO) with a
response time of 1.3-μs (typical
Adjustable overvoltage lockout (OVLO) with a
response time of 1.3-μs (typical
Last edit: 05 Jun 2025 06:59 by alexandrap.
Please Log in or Create an account to join the conversation.
Time to create page: 0.114 seconds