Is someone using Gmoccapy Plasma ?

i thought about the noises in system.

1) Triple Beast from Benezan benezan-electronics.de/shop/product_info...ath=8&products_id=61

2) Stahlwerk PCut 120S www.stahlwerk-schweissgeraete.de/de/shop...eider-cut-120-s.html

3) so what do you mean with how did u wire? (see pic ref-switch, float switch)

4) screend yes, earthed not (wiring 1+2) but wires are long enough to put all screens to earth

All those screens must be connected together at one common earth point at the box end. That will be a good start. Make sure that all power is earthed at the same point

By the way, your box look great and well built.

ok i will go forward with it, but i´m on an exhebition next week in hannover, so i think you hear earliest 16th of October again from me.

Thanks for the words about the box . I do service on Feed Mixing Computers and Panels so i know how to build them up.
But the box is a little bit small for all the components, but it was rest from a customers order so no need to buy it

you'll find adding a debounce component to all your switches will help .

ook, so i need more space in my panel

but it looks a good idea, but it will delay the e-stop if it is pressed

Michael80 wrote: but it looks a good idea, but it will delay the e-stop if it is pressed

Not by enough to matter. How long does it take you to press the e-stop? Another 2mS is neither here nor there.