Home all button no working
- mariusl
-
Topic Author
- Offline
- Platinum Member
-
16 Apr 2022 07:29 - 16 Apr 2022 07:29 #240379
by mariusl
Regards
Marius
www.bluearccnc.com
Home all button no working was created by mariusl
Hi
I have a four axis setup with no home switch on the Z axis. It is not displayed either. I can home the axis individually with the buttons but not together with the Home All button.
The code does not execute either but with no error message or warning.
I have a four axis setup with no home switch on the Z axis. It is not displayed either. I can home the axis individually with the buttons but not together with the Home All button.
The code does not execute either but with no error message or warning.
Regards
Marius
www.bluearccnc.com
Last edit: 16 Apr 2022 07:29 by mariusl.
Please Log in or Create an account to join the conversation.
- HansU
-
- Offline
- Moderator
-
Less
More
- Posts: 687
- Thank you received: 207
16 Apr 2022 17:38 #240407
by HansU
However, I can confirm that the fourth axis is not homed when pressing home_all.
I tried with the XYZC example configuration.
There it is neccessary to press Home C to have all homed.
But it prints some debug information:
Replied by HansU on topic Home all button no working
What is not displayed?I have a four axis setup with no home switch on the Z axis. It is not displayed either.
However, I can confirm that the fourth axis is not homed when pressing home_all.
I tried with the XYZC example configuration.
There it is neccessary to press Home C to have all homed.
But it prints some debug information:
Hal Status not all homed 013
Hal Status not all homed 3
Please Log in or Create an account to join the conversation.
- mariusl
-
Topic Author
- Offline
- Platinum Member
-
19 Apr 2022 07:51 #240632
by mariusl
Regards
Marius
www.bluearccnc.com
Replied by mariusl on topic Home all button no working
The Z axis is not displayed as the machine does not have a Z axis.
Regards
Marius
www.bluearccnc.com
Please Log in or Create an account to join the conversation.
- HansU
-
- Offline
- Moderator
-
Less
More
- Posts: 687
- Thank you received: 207
19 Apr 2022 12:00 #240648
by HansU
Replied by HansU on topic Home all button no working
Ah, you mean you have a home button for Z even though you don't have a Z axis (and no DRO for Z?), right?
Please Log in or Create an account to join the conversation.
- mariusl
-
Topic Author
- Offline
- Platinum Member
-
19 Apr 2022 16:09 #240665
by mariusl
Regards
Marius
www.bluearccnc.com
Replied by mariusl on topic Home all button no working
No if you hide the Z axis there is no button for that.
Regards
Marius
www.bluearccnc.com
Please Log in or Create an account to join the conversation.
- mariusl
-
Topic Author
- Offline
- Platinum Member
-
20 Apr 2022 07:33 #240719
by mariusl
Regards
Marius
www.bluearccnc.com
Replied by mariusl on topic Home all button no working
The reason seems to be that if you do not have HOME_SEQUENCE = 0/1/-1 specified, the home_all will not home any axis.
Regards
Marius
www.bluearccnc.com
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Moderators: newbynobi, HansU
Time to create page: 0.103 seconds