Replacing jogging buttons with custom picture in Version 3?
- Aciera
-
Topic Author
- Offline
- Administrator
-
Less
More
- Posts: 4308
- Thank you received: 1910
20 May 2023 06:50 #271711
by Aciera
Replacing jogging buttons with custom picture in Version 3? was created by Aciera
In Gmoccapy version 2 I used to be able to replace the jogging buttons section in the gui with a custom icon with this line in the ini:
Having installed LinuxCNC 2.9 with Gmoccapy Version 3.4.1 I don't seem to be able to get that working anymore. Has this been removed in the new version?
DISPLAY = gmoccapy -logo ../MyIcons/Images/vertikal_hell.icoHaving installed LinuxCNC 2.9 with Gmoccapy Version 3.4.1 I don't seem to be able to get that working anymore. Has this been removed in the new version?
Please Log in or Create an account to join the conversation.
- HansU
-
- Offline
- Moderator
-
Less
More
- Posts: 687
- Thank you received: 207
20 May 2023 18:09 #271766
by HansU
Replied by HansU on topic Replacing jogging buttons with custom picture in Version 3?
This feature got stuck in a TODO comment while the conversion to Gtk3 =)
Now brought back and should be soon in 2.9, see github.com/LinuxCNC/linuxcnc/pull/2461 especially github.com/LinuxCNC/linuxcnc/pull/2461/c...24a9a978832b8aa14b91
Now brought back and should be soon in 2.9, see github.com/LinuxCNC/linuxcnc/pull/2461 especially github.com/LinuxCNC/linuxcnc/pull/2461/c...24a9a978832b8aa14b91
The following user(s) said Thank You: Aciera
Please Log in or Create an account to join the conversation.
Moderators: newbynobi, HansU
Time to create page: 0.152 seconds