halshow with PathPilot 2
- DanieGouws
- Offline
- New Member
-
Less
More
- Posts: 11
- Thank you received: 0
24 Mar 2020 20:27 #161369
by DanieGouws
Replied by DanieGouws on topic halshow with PathPilot 2
Hi Ken,
I changed the text file halshow to:
#!/usr/bin/tclsh8.6
source ~/tmc/tcl/bin/halshow.tcl
Now it is working fine, thank you very much Danie
I changed the text file halshow to:
#!/usr/bin/tclsh8.6
source ~/tmc/tcl/bin/halshow.tcl
Now it is working fine, thank you very much Danie
Please Log in or Create an account to join the conversation.
15 Dec 2020 21:39 #192076
by gerritv
Replied by gerritv on topic halshow with PathPilot 2
A big thank you for documenting this, it will help greatly once I start enhancing my Pathpilot setup on a shop-built gantry mill/router I am finishing up.
Gerrit
Gerrit
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.107 seconds