Tormach 1100 Lost motion compensation
- Mofosheee
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
28 Mar 2022 12:24 #238519
by Mofosheee
Tormach 1100 Lost motion compensation was created by Mofosheee
Hello Linux Forum
I am trying to compensate for lost motion on my Path Pilot Tormach 1100 CNC mill.
Does anybody have experience making these adjustments? Thank you.
I am trying to compensate for lost motion on my Path Pilot Tormach 1100 CNC mill.
Does anybody have experience making these adjustments? Thank you.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19357
- Thank you received: 6480
28 Mar 2022 17:55 #238536
by tommylight
Replied by tommylight on topic Tormach 1100 Lost motion compensation
Moved to "Path Pilot" section.
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23537
- Thank you received: 4852
29 Mar 2022 21:35 #238665
by andypugh
Replied by andypugh on topic Tormach 1100 Lost motion compensation
Backlash compensation _might_ help, but it sounds like a mechanical issue? There shouldn't be any lost motion, surely?
Please Log in or Create an account to join the conversation.
- Mofosheee
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
30 Mar 2022 12:51 #238728
by Mofosheee
Replied by Mofosheee on topic Tormach 1100 Lost motion compensation
Thanks for responding.
You are correct. My adjustment technique was improper.
Resolved by adjusting the bearings and gibs in accordance with a You tube video by NYCNC.
You are correct. My adjustment technique was improper.
Resolved by adjusting the bearings and gibs in accordance with a You tube video by NYCNC.
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.061 seconds