New Laser Build - raster engraving
- rdtsc
-
- Away
- Senior Member
-
Less
More
- Posts: 56
- Thank you received: 12
01 Mar 2026 23:28 #343703
by rdtsc
Replied by rdtsc on topic New Laser Build - raster engraving
Guys, try the attached. No idea if it works, but it's not giving any errors and outputs data. 
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 21497
- Thank you received: 7327
02 Mar 2026 00:15 #343707
by tommylight
Replied by tommylight on topic New Laser Build - raster engraving
I linked to a post containing absolutely everything you need, and as Andy noted, M67 should be used, not spindle stuff.
Please Log in or Create an account to join the conversation.
- rdtsc
-
- Away
- Senior Member
-
Less
More
- Posts: 56
- Thank you received: 12
02 Mar 2026 21:07 #343755
by rdtsc
Replied by rdtsc on topic New Laser Build - raster engraving
Tommy are you talking about the engravertest.zip?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 21497
- Thank you received: 7327
02 Mar 2026 23:08 #343759
by tommylight
Replied by tommylight on topic New Laser Build - raster engraving
Yes and no, sorry my bad, i thought i uploaded the new config there, so thank you for reminding me.
I did upload the new config there and added some more info at the top, so have a look at your own leisure.
These are also new machines i have built and use the same configs for PWM and here i did upload the new configs.
forum.linuxcnc.org/show-your-stuff/46752...ver-etcher-scratcher
I did upload the new config there and added some more info at the top, so have a look at your own leisure.
These are also new machines i have built and use the same configs for PWM and here i did upload the new configs.
forum.linuxcnc.org/show-your-stuff/46752...ver-etcher-scratcher
The following user(s) said Thank You: rdtsc
Please Log in or Create an account to join the conversation.
- raggielyle1@gmail.com
- Offline
- New Member
-
Less
More
- Posts: 14
- Thank you received: 1
14 Apr 2026 09:38 #345527
by raggielyle1@gmail.com
Replied by raggielyle1@gmail.com on topic New Laser Build - raster engraving
Sorry about the delay. I cant upload the file because it has a sh extension. Please email me This email address is being protected from spambots. You need JavaScript enabled to view it. and I send the file.
Please Log in or Create an account to join the conversation.
- rodw
-
- Away
- Platinum Member
-
Less
More
- Posts: 11854
- Thank you received: 4018
14 Apr 2026 11:32 #345535
by rodw
Replied by rodw on topic New Laser Build - raster engraving
just change it to end in .sh.txtSorry about the delay. I cant upload the file because it has a sh extension. Please email me This email address is being protected from spambots. You need JavaScript enabled to view it. and I send the file.
Please Log in or Create an account to join the conversation.
Moderators: snowgoer540
Time to create page: 0.320 seconds