1. User Interfaces
  3. Plasmac
  5. Toggle program coordinate system to machine coordinate system

Toggle program coordinate system to machine coordinate system

More
10 Nov 2022 06:10 #256319 by Daddio
Toggle program coordinate system to machine coordinate system was created by Daddio
Hello all,
Is it possible to toggle the coordinate system in the DRO display from program coordinates to machine coordinates and back again?  I am running QtPlasmaC on LinuxCNC 2.9.
Thanks!

Please Log in or Create an account to join the conversation.

More
10 Nov 2022 15:41 #256358 by snowgoer540
Replied by snowgoer540 on topic Toggle program coordinate system to machine coordinate system
Maybe this thread will help:

forum.linuxcnc.org/plasmac/43381-showing...-coordinates?start=0

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
  1. User Interfaces
  3. Plasmac
  5. Toggle program coordinate system to machine coordinate system
Time to create page: 0.057 seconds
Powered by Kunena Forum