Linuxcnc plasma rotary

More
2 years 9 months ago #292040 by JeffreySc
Replied by JeffreySc on topic Linuxcnc plasma rotary
Is there a post processor for standard Plasma table with out rotary? I have Sheetcam and a Commandcnc controller. I would like to use fusion 360 instead of Sheetcam if possible. Thanks

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #292062 by snowgoer540
Replied by snowgoer540 on topic Linuxcnc plasma rotary
forum.linuxcnc.org/plasmac/38438-plasmac-post-processors

Please Log in or Create an account to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum