Set Tool Touch Off Pos

More
01 Sep 2025 16:49 #334243 by rocket6delta
Set Tool Touch Off Pos was created by rocket6delta
When i attempt use the set the tool touch off position button, the X Y and Z remains greyed out and does not change values.  Seems like I'm missing something to make those 3 values become active.

Thanks for any input.

Please Log in or Create an account to join the conversation.

More
02 Sep 2025 19:34 #334304 by rocket6delta
Replied by rocket6delta on topic Set Tool Touch Off Pos
Probe Basic.

Yes all axis was homed.

I jogged down the spindle to tap the touch plate. Tried pressing the button but no response.

Please Log in or Create an account to join the conversation.

More
06 Sep 2025 23:48 #334571 by Lcvette
Replied by Lcvette on topic Set Tool Touch Off Pos
Do you have all the subroutines in the sub folder and are you sure you added all the bar file parameters per the docs?

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette
Time to create page: 0.252 seconds
Powered by Kunena Forum