Sample Qtvcp Screens

Aciera wrote: Mine is only a 15" 1024x768

Installed qtdragon in x1mill window 1024x768. It remains to register the handler, but it's hard for me, if interested, I can publish it.

is that qtdragon and x11 combined? Nice.
Not sure what you mean by the handler problem.
You are very fast with gui changes!

I was in a hurry. Thanks for your attention! The final release of the hybrid is 1024x790.

I'd love to try out this x1mill hybrid if you get a chance to publish it.

I've got a 1280x1024 screen. Currently I'm running a scrunched down version of qtdragon (screenshot attached), which works OK, but it's a tight fit. The gcode viewer in particular is too small to be of much use. So, I really like the "full" mode offered by qtx1mill. No need to make a special version to fit my resolution, it looks like it will be easy enough for me to stretch out in designer.

See if you like it. Topic published forum.linuxcnc.org/qtvcp/38804-ustomizat...vcp?start=150#183935 .

Here is a hybrid at 1280x1024. Please tell me how to add a grid without a menu bar?