LinuxCNC wallpapers

More
31 Aug 2021 22:56 #219295 by tommylight
Replied by tommylight on topic LinuxCNC wallpapers

Nothing ?
No one?
Not even Rod !!!
Need to change my wallpaper, so move it. :)

 
Sorry tommylight I am sure everybody is insanely busy ( I am sure you are too ) give it more time.

LOL, i gave it plenty of time, that post was made on 24 May 2020 at 23:43, but now at least we have something to chew on ! :)
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
01 Sep 2021 07:00 #219313 by robertspark
Replied by robertspark on topic LinuxCNC wallpapers
it's not that difficult to plonk a linuxcnc / chips logo on a background...

​​​​​the only problem was MX-Linux has a clock overlaid on the desktop in the top rhs corner....  hence I moved the logo down so I could see the clock
come on let's see what u got and like for a background and make it interesting 
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
02 Sep 2021 00:31 #219382 by andypugh
Replied by andypugh on topic LinuxCNC wallpapers
When I built the ISO I was intending to have a LinuxCNC-specific wallpaper, and liked the idea of something like:
www.alamy.com/steel-swarf-industrial-scr...al-image1762323.html

But I couldn't find anything with a suitably non-restrictive license.

Please Log in or Create an account to join the conversation.

More
02 Sep 2021 06:24 #219404 by robertspark
Replied by robertspark on topic LinuxCNC wallpapers
interesting to know.

I looked for uncopy right wall paper but there was very little available....

I did think about setting something up and getting the camera out but I'm not very imaginative with the camera.

I think we should have a selection as it's nice for the brand and it finishes the install off with a bit of background eye candy imo

Please Log in or Create an account to join the conversation.

More
02 Sep 2021 11:21 #219426 by tommylight
The following user(s) said Thank You: Grotius

Please Log in or Create an account to join the conversation.

More
02 Sep 2021 23:26 - 02 Sep 2021 23:27 #219470 by my1987toyota
Replied by my1987toyota on topic LinuxCNC wallpapers
As long as it isn't a penguin wearing a face mask. ( bad Covid-19 joke ). Too soon ?
Last edit: 02 Sep 2021 23:27 by my1987toyota.
The following user(s) said Thank You: tommylight, Grotius

Please Log in or Create an account to join the conversation.

More
03 Sep 2021 19:13 #219551 by Grotius
Replied by Grotius on topic LinuxCNC wallpapers
As long as it isn't a penguin with myocarditis. ( bad joke? ) Too late ?
The following user(s) said Thank You: tommylight, my1987toyota

Please Log in or Create an account to join the conversation.

More
06 Sep 2021 16:18 #219770 by my1987toyota
Replied by my1987toyota on topic LinuxCNC wallpapers

As long as it isn't a penguin with myocarditis. ( bad joke? ) Too late ?
 

first I had to look up what Myocarditis was. Now I have to ask what am I missing ?
The following user(s) said Thank You: snowgoer540

Please Log in or Create an account to join the conversation.

More
06 Sep 2021 21:58 #219795 by Grotius
Replied by Grotius on topic LinuxCNC wallpapers
Hi,

It's a (bad) vaccin joke and for the most problably (too late)

 
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
06 Sep 2021 22:26 #219798 by my1987toyota
Replied by my1987toyota on topic LinuxCNC wallpapers
thanks for the clarification Grotius

Please Log in or Create an account to join the conversation.

Time to create page: 0.100 seconds
Powered by Kunena Forum