Noobie question - Spindle speed

More
09 Oct 2018 18:21 #118601 by Clive S
Jools can you message me through Mycncuk forum

Please Log in or Create an account to join the conversation.

More
09 Oct 2018 18:33 #118602 by andypugh
Or you could just talk about it here...

Please Log in or Create an account to join the conversation.

More
09 Oct 2018 19:04 #118603 by Clive S

Or you could just talk about it here...


I agree Andy as it probably would help other people as well. I built the control box for a friend on mine on a budget It was some time ago V2.6 if I remember. I would rather update it to 2.7xxxx and not sure if Jools can do it so I am prepared for him to send me the drive to update before we start changing files around I had contact with him some time ago on the other forum.

It would give him more opportunities to put another PP in the machine.

I also am not happy to publish my email

Please Log in or Create an account to join the conversation.

More
11 Oct 2018 18:23 #118676 by jools
Sorry thought I'd responded to this. Clive I'll drop you a PM on Mycnc but we can keep the final solution on here too.

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.149 seconds
Powered by Kunena Forum