Forum Menu

ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play

More
1 year 4 months ago #330040 by beauxnez
Replied by beauxnez on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
Unable to recompile udp.comp file

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago #330042 by tommylight
Replied by tommylight on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
Those are NOT my files.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago #330044 by beauxnez
Replied by beauxnez on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
Thanks, it works, but I can't remove the emergency stop.

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago #330045 by beauxnez
Replied by beauxnez on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
For card configuration?

adresse =10.10.10.10
network mask = 24 ??
network mask =  ???

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago - 1 year 4 months ago #330047 by beauxnez
Replied by beauxnez on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
I managed to remove the emergency
I configured the card 10.10.10.11
All that remains is to test with stepper motors,I have a plasma CNC, it will be complicated for a beginner to have the plasmac interface?
Last edit: 1 year 4 months ago by beauxnez.

Please Log in or Create an account to join the conversation.

More
1 year 4 months ago #330048 by tommylight
Replied by tommylight on topic ESP32/S2/S3 LinuxCNC Controller (6 axis hardware step gen), USB plug-and-play
Screenshot?
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

Time to create page: 0.096 seconds
Powered by Kunena Forum