Need help in Incremental Round Move

andypugh
Away
Moderator

23 Nov 2015 19:07 #65712 by andypugh

Replied by andypugh on topic Need help in Incremental Round Move

G0G53Z148 wrote:
Linuxcnc is a Goog controller but some thisgs are very very cumbersome

You can add your own G-codes if you want:

linuxcnc.org/docs/2.7/html/remap/remap.html

Though you can't re-map G1, as far as I know. You would have to add a G1.1 (for example)

Please Log in or Create an account to join the conversation.

G0G53Z148
Topic Author
Offline
Senior Member

23 Nov 2015 19:44 - 25 Nov 2015 13:44 #65715 by G0G53Z148

Replied by G0G53Z148 on topic Need help in Incremental Round Move

because english is not my native language i must say

i have after a long time my machine running as good with linux
only one change will be made for future to mesa
more i dont want to do and remap

thanks

Last edit: 25 Nov 2015 13:44 by BigJohnT. Reason: videos off topic

Please Log in or Create an account to join the conversation.

Time to create page: 0.055 seconds