Mesa 5i24 mesaflash : No 5I24 board found

Is the 7I65 watchdog LED on?

Yes red watchdog led is ON

Is the 7I65 comp function added to a servo thread?

Realtime Threads:
Period FP Name ( Time, Max-Time )
999926 YES servo-thread ( 147431, 436600 )
1 hm2_5i24.0.read
2 motion-command-handler
3 motion-controller
4 pid.x.do-pid-calcs
5 pid.y.do-pid-calcs
6 pid.z.do-pid-calcs
7 pid.a.do-pid-calcs
8 pid.b.do-pid-calcs
9 pid.c.do-pid-calcs
10 pid.spindle.do-pid-calcs
11 pid.4.do-pid-calcs
12 pid.5.do-pid-calcs
13 abs.spindle
14 lowpass.spindle
15 hm2_5i24.0.write
16 mult2.0
17 near.0
18 not.0
19 time.0
20 not.1

When I try add mesa-7i65 or mesa-7i65.0 to servo thread I get errors

I can read analog and input values from mesa-7i65.0:

Component Pins:
Owner Type Dir Value Name
13 float OUT -3.928223 mesa-7i65.0.analogue.0.in
13 float IN 0 mesa-7i65.0.analogue.0.out
13 float OUT -3.933105 mesa-7i65.0.analogue.1.in
13 float IN 0 mesa-7i65.0.analogue.1.out
13 float OUT -10 mesa-7i65.0.analogue.2.in
13 float IN 0 mesa-7i65.0.analogue.2.out
13 float OUT -10 mesa-7i65.0.analogue.3.in
13 float IN 0 mesa-7i65.0.analogue.3.out
13 float OUT -10 mesa-7i65.0.analogue.4.in
13 float IN 0 mesa-7i65.0.analogue.4.out
13 float OUT -10 mesa-7i65.0.analogue.5.in
13 float IN 0 mesa-7i65.0.analogue.5.out
13 float OUT 6.25 mesa-7i65.0.analogue.6.in
13 float IN 0 mesa-7i65.0.analogue.6.out
13 float OUT -3.666992 mesa-7i65.0.analogue.7.in
13 float IN 0 mesa-7i65.0.analogue.7.out
13 bit OUT FALSE mesa-7i65.0.digital.0.in
13 bit OUT TRUE mesa-7i65.0.digital.1.in
13 bit OUT TRUE mesa-7i65.0.digital.2.in
13 bit OUT FALSE mesa-7i65.0.digital.3.in
13 bit IN FALSE mesa-7i65.0.enable.0.out
13 bit IN FALSE mesa-7i65.0.enable.1.out
13 bit IN FALSE mesa-7i65.0.enable.2.out
13 bit IN FALSE mesa-7i65.0.enable.3.out
13 bit IN FALSE mesa-7i65.0.enable.4.out
13 bit IN FALSE mesa-7i65.0.enable.5.out
13 bit IN FALSE mesa-7i65.0.enable.6.out
13 bit IN FALSE mesa-7i65.0.enable.7.out
13 bit OUT TRUE mesa-7i65.0.watchdog.has-bit

Are the 7I65s /ENABLE and RESET lines both low?
(these would be GPIO bits 22 and 23)

Component Pins:
Owner Type Dir Value Name
12 bit OUT TRUE hm2_5i24.0.gpio.022.in
12 bit OUT FALSE hm2_5i24.0.gpio.022.in_not
12 bit IN FALSE hm2_5i24.0.gpio.022.out

Component Pins:
Owner Type Dir Value Name
12 bit OUT TRUE hm2_5i24.0.gpio.023.in
12 bit OUT FALSE hm2_5i24.0.gpio.023.in_not
12 bit IN FALSE hm2_5i24.0.gpio.023.out