Mesa hm2/hm2_7i96s.0: error finishing read

More
3 years 10 months ago #259728 by JT
Replied by JT on topic Mesa hm2/hm2_7i96s.0: error finishing read
The r8168 driver was not installed on this PC.



And my Ethernet controller is one of these:
Code:
john@cave:~$ lspci | grep -i 'ethernet' 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 04)

I guess I need to take out the PCIe  controller and see which one is on the motherboard.

JT

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259729 by JT
Replied by JT on topic Mesa hm2/hm2_7i96s.0: error finishing read
Latency did show a spike after a while of doing different things but that might have been the package manager too...

 

JT

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259731 by JT
Replied by JT on topic Mesa hm2/hm2_7i96s.0: error finishing read
I think I'll do any more sperimenting on the chicken PC... it only has two programs it runs...

JT

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259756 by zack
Replied by zack on topic Mesa hm2/hm2_7i96s.0: error finishing read
wtf is sperimenting?
usb seems to be a culprit on my machine
cant put my finger on it though
will keep sperimenting however

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago - 3 years 10 months ago #259768 by rodw
Replied by rodw on topic Mesa hm2/hm2_7i96s.0: error finishing read

I think I'll do any more sperimenting on the chicken PC... it only has two programs it runs...

JT

Talk about a hard case here! You got two NIC's and both ot them are in the Realtek naughty corner!
 Which one is your Mesa card attached to ?
I guess you have to remove the pcie card to find out.... :(

EDIT: I would go with the R811/R8168 NIC for Mesa as I got one of them working here
RodW
MrRodW.au
Youtube
Last edit: 3 years 10 months ago by rodw.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #261559 by JT
Replied by JT on topic Mesa hm2/hm2_7i96s.0: error finishing read
Just looking at your instructions kernel-deb.txt and I notice the following
Code:
make xconfig scripts/config --disable SYSTEM_REVOCATION_KEYS scripts/config --disable DEBUG_INFO scripts/config --enable DEBUG_INFO_NONE scripts/config --set-str SYSTEM_TRUSTED_KEYS ""

Is this what makes your 6.1 rt kernel work with Realtek?

JT

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.103 seconds
Powered by Kunena Forum