2 seperate MPG handwheels for each axis - CNC Lathe build

More
6 years 5 months ago #168046 by denhen89
Replied by denhen89 on topic 2 seperate MPG handwheels for each axis - CNC Lathe build
I have tried: sserial_port_0=200xxxx
nothing happens on halmeter.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago - 6 years 5 months ago #168047 by tommylight
Replied by tommylight on topic 2 seperate MPG handwheels for each axis - CNC Lathe build
The wiring is OK, on TB5.
Edited, wrong info removed.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
Last edit: 6 years 5 months ago by tommylight. Reason: wrong info

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #168048 by tommylight
Replied by tommylight on topic 2 seperate MPG handwheels for each axis - CNC Lathe build
The blue and white wire.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #168049 by denhen89
Replied by denhen89 on topic 2 seperate MPG handwheels for each axis - CNC Lathe build
Okay, i will test it, but on this manual: wiki.eusurplus.com/downloads/7i76E.pdf
on page: Connection of MPG's, it shows that i should connect it to TB5

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #168050 by denhen89
Replied by denhen89 on topic 2 seperate MPG handwheels for each axis - CNC Lathe build
Still not showing anything on Halmeter

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #168051 by tommylight
Replied by tommylight on topic 2 seperate MPG handwheels for each axis - CNC Lathe build

denhen89 wrote: Okay, i will test it, but on this manual: wiki.eusurplus.com/downloads/7i76E.pdf
on page: Connection of MPG's, it shows that i should connect it to TB5

Yes it does, leme check again.
Back in a few.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

Time to create page: 0.283 seconds
Powered by Kunena Forum