Mesa 7i96 and LinuxCNC 2.8 PnCConf
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 18122
- Thank you received: 5337
31 Aug 2020 15:57 #180232
by PCW
Replied by PCW on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf
I would suggest connecting V- to frame ground
Please Log in or Create an account to join the conversation.
- Aldenflorio
-
- Offline
- Platinum Member
-
Less
More
- Posts: 389
- Thank you received: 15
31 Aug 2020 15:59 #180234
by Aldenflorio
Replied by Aldenflorio on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf
What doe you mean frame ground? (I’m not too familiar with electronics
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 18122
- Thank you received: 5337
31 Aug 2020 16:52 #180239
by PCW
Replied by PCW on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf
Earth ground (same as the shield)
Please Log in or Create an account to join the conversation.
- Aldenflorio
-
- Offline
- Platinum Member
-
Less
More
- Posts: 389
- Thank you received: 15
31 Aug 2020 16:54 - 31 Aug 2020 16:55 #180240
by Aldenflorio
Replied by Aldenflorio on topic Mesa 7i96 and LinuxCNC 2.8 PnCConf
Ok, so run a wire from V- to ground? I don’t think I’ve heard that before
Last edit: 31 Aug 2020 16:55 by Aldenflorio.
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.090 seconds