- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
- garrettmin
-
- Offline
- Senior Member
-
Less
More
- Posts: 60
- Thank you received: 0
19 Mar 2022 19:54 - 19 Mar 2022 19:57 #237759
by garrettmin
Replied by garrettmin on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
.
Last edit: 19 Mar 2022 19:57 by garrettmin.
Please Log in or Create an account to join the conversation.
- garrettmin
-
- Offline
- Senior Member
-
Less
More
- Posts: 60
- Thank you received: 0
19 Mar 2022 20:09 - 19 Mar 2022 23:16 #237762
by garrettmin
Replied by garrettmin on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
In the photo above the IDC26 Female Cable #1 Pin is on Left when looking at the connector from facing side.
In 7i92 Manual Schematic, P2 I/O 0..16
are ordered bottom to top 0 to 16. or IDC26 Left to Right.
Schematic indicates P2 IDC26 #1 Pin is on the Bottom or IDC26 = Left is Pin#1.
In 7i92 Manual Schematic, P2 I/O 0..16
are ordered bottom to top 0 to 16. or IDC26 Left to Right.
Schematic indicates P2 IDC26 #1 Pin is on the Bottom or IDC26 = Left is Pin#1.
Last edit: 19 Mar 2022 23:16 by garrettmin.
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 18120
- Thank you received: 5337
19 Mar 2022 20:39 #237766
by PCW
Replied by PCW on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
None of that is relevant, It's as simple as this:
If you have IDC connectors and you align pin1 to pin 1, the cable is correct.
If you have IDC connectors and you align pin1 to pin 1, the cable is correct.
Please Log in or Create an account to join the conversation.
- garrettmin
-
- Offline
- Senior Member
-
Less
More
- Posts: 60
- Thank you received: 0
20 Mar 2022 11:40 - 20 Mar 2022 21:14 #237826
by garrettmin
Replied by garrettmin on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
.
Last edit: 20 Mar 2022 21:14 by garrettmin.
Please Log in or Create an account to join the conversation.
- garrettmin
-
- Offline
- Senior Member
-
Less
More
- Posts: 60
- Thank you received: 0
20 Mar 2022 13:38 - 20 Mar 2022 20:42 #237842
by garrettmin
Replied by garrettmin on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
.
Last edit: 20 Mar 2022 20:42 by garrettmin.
Please Log in or Create an account to join the conversation.
- garrettmin
-
- Offline
- Senior Member
-
Less
More
- Posts: 60
- Thank you received: 0
20 Mar 2022 13:46 - 20 Mar 2022 20:42 #237845
by garrettmin
Replied by garrettmin on topic trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
.
Last edit: 20 Mar 2022 20:42 by garrettmin.
Please Log in or Create an account to join the conversation.
Moderators: cmorley
- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- trouble shoting "Pin 'hm2_5i25.0.7i76.0.0.input-24' does not exist 4977"
Time to create page: 0.097 seconds