Forum Menu

Re:pncconf - feature requests

More
14 years 11 months ago #14548 by BigJohnT
Replied by BigJohnT on topic Re:pncconf - feature requests
I will have a basic 5i25 + 7i76 config up on my web site later this morning that you can build on. As soon as I'm done I'll post a link. When I'm happy with it I'll add it to 2.5.

John

Please Log in or Create an account to join the conversation.

More
14 years 11 months ago #14550 by BigJohnT
Replied by BigJohnT on topic Re:pncconf - feature requests
chimpera wrote:

Peter, as a new user what is the best way for me to get the 5i25+7i76 configured with steppers?
Thanks, Ben


You can get it here for now:

gnipsel.com/shop/emc2/emc2.xhtml

John

Please Log in or Create an account to join the conversation.

More
14 years 11 months ago #14551 by andypugh
Replied by andypugh on topic Re:pncconf - feature requests
BigJohnT wrote:

You can get it here for now:
gnipsel.com/shop/emc2/emc2.xhtml


"404 File not found

Well it looks like I screwed up a link."

Please Log in or Create an account to join the conversation.

More
14 years 11 months ago #14552 by BigJohnT
Replied by BigJohnT on topic Re:pncconf - feature requests
Well, for some strange reason the upload of the file failed but reported a good upload.

I uploaded it again...

John

Please Log in or Create an account to join the conversation.

More
14 years 11 months ago #14560 by cmorley
Replied by cmorley on topic Re:pncconf - feature requests
John can you post the complete HAL pin list with the 7i76 connected? or do you have two connected?

Please Log in or Create an account to join the conversation.

More
14 years 11 months ago #14561 by cmorley
Replied by cmorley on topic Re:pncconf - feature requests
If possible could you show separately the pinouts when using different modes?

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 0.188 seconds
Powered by Kunena Forum