- Configuring LinuxCNC
- Basic Configuration
- 7i97T with Mesa CT- Desn't seem to be outputting an analogue signal.
7i97T with Mesa CT- Desn't seem to be outputting an analogue signal.
13 Oct 2024 21:13 #312007
by PCW
Replied by PCW on topic 7i97T with Mesa CT- Desn't seem to be outputting an analogue signal.
If encoder 2 is assigned to joint 2, then yes, that should be [JOINT_2]
I am being a bit vague because there is no fixed mapping between
hardware=encoder/PWM/stepgen etc and joints.
I am being a bit vague because there is no fixed mapping between
hardware=encoder/PWM/stepgen etc and joints.
The following user(s) said Thank You: flyingbrick
Please Log in or Create an account to join the conversation.
- flyingbrick
- Offline
- Senior Member
Less
More
- Posts: 43
- Thank you received: 13
13 Oct 2024 21:56 #312010
by flyingbrick
Replied by flyingbrick on topic 7i97T with Mesa CT- Desn't seem to be outputting an analogue signal.
That is great thanks mate. Makes sense to me now. Not sure how to tag people in these posts but I'll try inform JT of the issue.
Please Log in or Create an account to join the conversation.
- Configuring LinuxCNC
- Basic Configuration
- 7i97T with Mesa CT- Desn't seem to be outputting an analogue signal.
Time to create page: 0.074 seconds