Basic Configuration 1145 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
slaving one axis to another Topic started 02 Jan 2012 20:56, by boblee Last Post 03 Jan 2012 11:25 by Rick G	Replies:5 Views:5529	Last Post by Rick G 03 Jan 2012 11:25
Thinkpad T42 Parallel Port not working Topic started 26 Dec 2011 19:19, by eyalto Last Post 28 Dec 2011 11:31 by Rick G	Replies:6 Views:9275	Last Post by Rick G 28 Dec 2011 11:31
Tuning problems Topic started 07 Dec 2011 00:57, by submicro Last Post 21 Dec 2011 16:17 by submicro 1 2 3	Replies:24 Views:14.4k	submicro Last Post by submicro 21 Dec 2011 16:17
tune the stepper movement so 0.25" = 0.25" Topic started 02 Dec 2011 05:58, by Carl Harden Last Post 09 Dec 2011 16:37 by RayJr	Replies:7 Views:7835	RayJr Last Post by RayJr 09 Dec 2011 16:37
Par port card problems what to do??? Topic started 03 Dec 2011 01:14, by garymcrobertpdx Last Post 05 Dec 2011 07:03 by garymcrobertpdx 1 2	Replies:12 Views:10.8k	garymcrobertpdx Last Post by garymcrobertpdx 05 Dec 2011 07:03
What am I doing wrong? (Mill vs Lathe speed) Topic started 03 Dec 2011 17:45, by Harry_Y Last Post 05 Dec 2011 00:07 by Harry_Y 1 2	Replies:10 Views:8229	Harry_Y Last Post by Harry_Y 05 Dec 2011 00:07
Can Scales be used to close the loop? Topic started 20 Oct 2011 22:21, by DroopG96 Last Post 03 Dec 2011 05:43 by garymcrobertpdx	Replies:9 Views:9008	garymcrobertpdx Last Post by garymcrobertpdx 03 Dec 2011 05:43
Does this pin assignment look OK? Topic started 01 Dec 2011 14:26, by Harry_Y Last Post 02 Dec 2011 20:24 by Harry_Y	Replies:8 Views:6499	Harry_Y Last Post by Harry_Y 02 Dec 2011 20:24
Waiting for operator. Topic started 19 Nov 2011 00:02, by sheetmetal Last Post 19 Nov 2011 03:18 by sheetmetal	Replies:2 Views:3915	sheetmetal Last Post by sheetmetal 19 Nov 2011 03:18
Z DIR PROBLEM AND OUT FOR RELAY Topic started 17 Nov 2011 16:13, by cncdtgrouter Last Post 18 Nov 2011 10:31 by cncdtgrouter	Replies:2 Views:2961	cncdtgrouter Last Post by cncdtgrouter 18 Nov 2011 10:31
axis has fliped Topic started 12 Nov 2011 11:28, by guyver001 Last Post 12 Nov 2011 13:01 by guyver001	Replies:2 Views:2481	guyver001 Last Post by guyver001 12 Nov 2011 13:01
Resolvers to Encoders Topic started 01 Nov 2011 23:14, by SRT Last Post 09 Nov 2011 21:16 by jmelson	Replies:7 Views:9644	jmelson Last Post by jmelson 09 Nov 2011 21:16
fine tuning - x-axis resolution - HELP!! Topic started 23 Oct 2011 21:03, by whampoo Last Post 07 Nov 2011 11:41 by BigJohnT 1 2 3	Replies:29 Views:22.5k	Last Post by BigJohnT 07 Nov 2011 11:41
Spindle index-enable for threading repeat passes. Topic started 17 Oct 2011 13:00, by NICKKINSMAN Last Post 31 Oct 2011 17:38 by NICKKINSMAN 1 2 3	Replies:21 Views:18.1k	NICKKINSMAN Last Post by NICKKINSMAN 31 Oct 2011 17:38
Two stepper motors on one axis - help needed Topic started 23 Oct 2011 18:04, by DaveAK Last Post 24 Oct 2011 00:52 by DaveAK	Replies:2 Views:5871	DaveAK Last Post by DaveAK 24 Oct 2011 00:52
Deviation problem with configured axis Topic started 14 Oct 2011 11:57, by Tilman Last Post 19 Oct 2011 17:23 by andypugh 1 2 3	Replies:28 Views:22.6k	Last Post by andypugh 19 Oct 2011 17:23
Pushbutton To Relay Control Topic started 30 Sep 2011 11:55, by NICKKINSMAN Last Post 06 Oct 2011 17:34 by NICKKINSMAN	Replies:7 Views:9053	NICKKINSMAN Last Post by NICKKINSMAN 06 Oct 2011 17:34
Stepper moving in only one direction Topic started 02 Oct 2011 00:44, by tduckman Last Post 03 Oct 2011 09:03 by andypugh	Replies:2 Views:4857	Last Post by andypugh 03 Oct 2011 09:03
Homng moving away from home Topic started 03 Sep 2011 16:47, by TarHeelTom Last Post 03 Oct 2011 08:00 by TarHeelTom 1 2	Replies:18 Views:14.5k	TarHeelTom Last Post by TarHeelTom 03 Oct 2011 08:00
How would one configure Kolmorgen drives in EMC. Topic started 16 Sep 2011 01:15, by cnczky Last Post 17 Sep 2011 05:11 by jmelson	Replies:2 Views:3128	jmelson Last Post by jmelson 17 Sep 2011 05:11

Time to create page: 0.152 seconds