Forum Menu

Installing LinuxCNC 2.9 or Master on Linux Mint 21

More
3 years 9 months ago #261776 by Stanislavz
Replied by Stanislavz on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
github.com/NTULINUX/RTAI/issues/15
Here is similar issue solved
The following user(s) said Thank You: Ismacr63

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #261783 by Ismacr63
Replied by Ismacr63 on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
I've been looking at it, but I don't know how to do it. 


with the rt kernel I have a lot of latency. 

With the rtai kernel I have good latency on debian booster and I want to test it on linux mint.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #261786 by Stanislavz
Replied by Stanislavz on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Post your config. And hardware. I was chasing latency past week.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #261791 by Ismacr63
Replied by Ismacr63 on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21

Post your config. And hardware. I was chasing latency past week.

Do you mean the linuxcnc configuration and the hardware of my pc?

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #261792 by Stanislavz
Replied by Stanislavz on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
Both. Especially grub parameters. And some screnshots from htop and watch cat /proc/interrups while making tests.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago - 3 years 9 months ago #261807 by Stanislavz
Replied by Stanislavz on topic Installing LinuxCNC 2.9 or Master on Linux Mint 21
So.. j3355 with Mint in its place. All runs nice and smooth.
Last edit: 3 years 9 months ago by Stanislavz.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.299 seconds
Powered by Kunena Forum