Gmoccapy - A new screen for linuxcnc

Unfortunately...

image missing https://dl.dropboxusercontent.com/u/2762301/gmoccapy_previewfout_22nov2014.png

But: the simulator (sim.gmoccapy/gmoccapy.ini) is working fine. So it is something with my configuration.
Any idea where to start looking?

DaBit wrote: And another thing: you once mentioned that you were planning a gmoccapy version with bulltin shopfloor programming as a paid option. Any progress on that? I am currently missing the 'shopfloor programming' abilities I have on the BF20, but that code really needs a thorough revision for the new mill. If there is something available for a reasonable amount of money I might be interested.
(and yes, I know about the existence of features and ngcgui/pyngcgui)

Ya like the heidenhain or mazatrol way !

I did lately thing very useful for me, I think you may also like.
This is a button switching two independent sliders of the manual feedrate.
image missing https://dl.dropboxusercontent.com/u/16218687/img1.png
image missing https://dl.dropboxusercontent.com/u/16218687/img2.png

I can't add the attachment ...

You can download changed files from here

.

Polish for gmoccapy.
The translation is far from perfect, but better than none.

You can download files from here

You can edit gmoccapy.po by poedit in /usr/share/locale/pl/LC_MESSAGES folder, or copy gmoccapy.po as pl.po to linuxcnc-dev/src/po/gmoccapy folder and compile linuxcnc.

Hallo Adam,

I do like the icon, are they open source?
Who has the copyright?

I will include polish traanslation in the official repo.
I will have to think about the doble slider

All you out there using gmoccapy, what do you think?

Norbert

All you out there using gmoccapy, what do you think?

Yes please!

With 18000mm/min maximum and a touchscreen it is pretty hard to select a moderate feed for 'manual milling'. A low/high speed toggle button and separate set of sliders would be nice.