SK Commander VFD Parms

Did you use the new 1.5 control board? I was wanting to use the bt30 spindle kit and the servo kit.

I didnt, I used a 7i85s.  I did use the servo kit.  I got a good deal on a used take-off from a guy on Facebook.

That said, I have a v1.5 board I'd sell if you're interested.  

I’d rather not have to change the board but I’m just getting into trying to mod my mill and don’t know anything about using a 7185s. I was really just trying to figure out the shortest path to a better spindle and servos.

Can't help with the spindle part, but I've got something in the works for the servos... stay tuned.

@Snowwy,
Can you please check the torque charts for the "servos" you got?
Sorry, but i still get very P.O. at "clearpath servos" as i am sure they were selling closed loop steppers as servos a few years back.
Thank you.

Sure:
X and Y model:

teknic.com/model-info/CPM-SDSK-3421P-ELS/

Z:

teknic.com/model-info/CPM-SDSK-3441P-ELS/