Tormach Released Control Baoard Schematics and Firmware Still Waiting VFD Files!

More
24 Jan 2022 18:04 #232991 by Iron-Man
That's a nice set up !!
I am waiting to hear back from Microchip about the "MPLAB PM3" . It would be nice to have a decent emulator for the PIC Micros.

Iron-Man

Please Log in or Create an account to join the conversation.

More
24 Jan 2022 19:35 #232999 by smgvbest
Much better than me, Can see your desk much more so than you can see mine, and you're a Hakko Fan as am I and as a mater of fact the hot air station looks like the one I had before moving the Quick 861. Though for Chip Programming I one have the T56

Please Log in or Create an account to join the conversation.

More
24 Jan 2022 21:15 #233014 by Iron-Man
I am going over the schematic and may make these changes:
1. Change the LM25575 to reduce the part count.
2.  Add DB 25 to input, from 5i25 / 6i25.
3.  Make all unused pins on J4 available.

Iron-Man

Please Log in or Create an account to join the conversation.

More
28 Jan 2022 07:10 #233349 by Contract_Pilot
I am currently running the Quick TR1300A and the TR1100

Please Log in or Create an account to join the conversation.

More
07 Feb 2022 03:21 #234218 by Iron-Man
One more item that is missing from the schematic "HOST PC / STEPPER / ENCODER" are the values for inductors L1, L2, L3, L4.
This is probably not critical.

Irion-Man

Please Log in or Create an account to join the conversation.

More
07 Feb 2022 03:28 - 07 Feb 2022 05:19 #234219 by Contract_Pilot
I think they may have released the wrong schematic or schematic for different rev?

Tormach has also went silent. I guess it is time to do a video update LOL ohh well.
Last edit: 07 Feb 2022 05:19 by Contract_Pilot.

Please Log in or Create an account to join the conversation.

More
05 Mar 2022 16:35 #236442 by Contract_Pilot
I did get a brief replay from Tormach CEO and then went silent again. They did release the VMC Console HID Board schematic and firmware.

I will be completing my follow up video to the 1st call out video shortly.

Please Log in or Create an account to join the conversation.

More
23 Apr 2022 15:52 - 23 Apr 2022 15:58 #241001 by Contract_Pilot
I dumped the firmware to the missing power drawbar controller. (Tormcah Permission to Post Public they will be adding it to their git hub soon) I also received a package from Tormach I have not opened yet. Package should contain a couple boards to recover the config bits.





 
Last edit: 23 Apr 2022 15:58 by Contract_Pilot.
The following user(s) said Thank You: Clive S, snowgoer540

Please Log in or Create an account to join the conversation.

More
29 Apr 2022 04:17 #241601 by Contract_Pilot
I finally got to opening the package from Tormach. I should have time this weekend to read the config bits.

The following user(s) said Thank You: tommylight, snowgoer540

Please Log in or Create an account to join the conversation.

Moderators: cncbasher
Time to create page: 0.185 seconds
Powered by Kunena Forum